Everest Trade - Quick Drying Ultimate Floor Paint - High Build - Anti-Slip - Available in 20 & 5 Litre

KEY FEATURES AND BENEFITS

• Quick-drying formula
• Available in a wide range of colours
• Anti-slip textured satin finish (With anti-slip option)
• High build formula
• Industrial quality alkyd resin floor paint
• Excellent resistance to cracking, flaking and blistering
• Great for high foot traffic areas
• Much more durable than acrylic quick-drying paints
• Excellent colour retention

Are you looking for a product for exterior use? click here to view the relevant exterior grade concrete floor paint.

For the most durable paint for industrial and factory applications take a look at the Everest Trade - Industrial Grade Polyurethane Floor Paint.

 If you're looking for a 2-part Epoxy Floor Paint CLICK HERE to view the relevant items.

PRODUCT DESCRIPTION
Everest Trade - Quick Drying High Build Ultimate Floor Paint is a single pack, quick-drying, low odour floor paint with the option added silica particles* for an effective anti-slip coating.  Designed to give a durable, easy clean protective finish to interior concrete floors.

Everest Trade Paints new alkyd-based floor paints give great durability and impact resistance as opposed to acrylic floor paints which tend to be much less durable. Near polyurethane-based durability with acrylic drying times!

This gives protection against solvent, salt and water damage.

especially suited for areas that need low odour or quick-drying paints such as food preparation areas or places that need a now downtime application.

Also ideal for garages, kitchens, workshops, industrial areas and agricultural areas. 

Made in England with Premium Alkyd Resins.

SURFACE PREPARATION
Ensure all surfaces are sound and clean, free from dust and flaking paint. 
Ensure surface is completely dry and free from condensation and damp.
Remove any loose or flaking paint.

If bare concrete is being painted it is advised a base coat of "Everest Trade Quick Drying Floor Primer and Sealer" is used to get the best results as the primer will provide a penetrating base coat for the topcoat to anchor to.

Can be easily applied by brush, roller or airless sprayer to all concrete floors, polished or power floated will need to be etched / scarified prior to application to minimise the chance of delamination.  This paint cannot be applied over oil/solvent based paints, it may react.

SUITABLE SUBSTRATES
Can be used on standard concrete, metal and wood as well as most other porous substrates.

COLOURS AVAILABLE
Light Grey, Grey, Dark Grey, Black, White, Magnolia, Classic Cream, Bright Red, Brick Red, Black, Yellow, Blue and Green.

As well as all standard RAL and BS colours for orders of 100 litres and over.

Click here to view the colour chart.
 
SPREADING RATE (Coverage)
Approximately 6 - 8 square metres per litre.
 
DRYING TIME
Under normal circumstances, it should be touch dry in 2 - 4 hours if well ventilated and conditions are dry. Add 1 hour to drying times of anti-slip variant.
 
APPLICATION
Brush, Roller, or Sprayer.

Mix thoroughly before use with a paddle mixer drill attachment.
Make sure the surface is 100% dry and free from any moisture or contaminants before application.
 
STORAGE PRECAUTIONS
Store away from heat and flames. Secure lid between uses to prevent paint hardening.
 
THINNERS
Can be let down with water if needed. Not Recommended.
 
SURFACE PREPARATION
Ensure all surfaces are sound and clean, free of algae and moss. 
Ensure surface is completely dry and free from condensation and damp.
Remove any loose or flaking paint.

BATCH INFORMATION
We recommend ordering all the paint required in one order so you receive the same batch, Ordering on different dates will result in receiving different batches which may result in a shade difference.
This is fine if you are planning on using the different batches on different coats, However, it's not recommended to use on the same coat.

*only if the anti-slip option is selected.