
Files and Data Sheets

MSDS - Material Safety Data Sheet
Coverage Calculator
You will need approximately:
*This is intended to be used as a rough guide only and is based on the average coverage of this product, the actual coverage on your surface may vary widely depending on your surface porosity.
Components: |
One Part / Single Pack |
Base Type: |
Water-Based Acrylic |
Finish: |
Satin Finish |
Stock Colours: |
Item is Clear |
Tintable: |
Not Tintable. |
Suitable Substrates: |
Please See Product Description |
Application Method: |
Apply By Brush, Roller, Conventional H.V.L.P or Airless Spray. |
Theoretical Coverage: |
Approximately 4 - 6 Square Metres Per Litre Per Coat |
Touch Dry: |
2 - 4 Hours at 18°C |
Overcoatable: |
4 Hours at 18°C |
Cleaner / Thinner: |
Clean up with warm soapy water |
Shelf Life: |
24 Months |
Sizes Available: |
Available in 5, 20, *200 and *1000 Litre Variants |
Everest Trade - Concrete Dustproofer / Floor Primer & Sealer - Solvent Free - 20 & 5 Litre
Including VAT
Inc VAT
Free Delivery on this item!
Files and Data Sheets

MSDS - Material Safety Data Sheet
Components: |
One Part / Single Pack |
Base Type: |
Water-Based Acrylic |
Finish: |
Satin Finish |
Stock Colours: |
Item is Clear |
Tintable: |
Not Tintable. |
Suitable Substrates: |
Please See Product Description |
Application Method: |
Apply By Brush, Roller, Conventional H.V.L.P or Airless Spray. |
Theoretical Coverage: |
Approximately 4 - 6 Square Metres Per Litre Per Coat |
Touch Dry: |
2 - 4 Hours at 15°C |
Overcoatable: |
4 Hours at 15°C |
Cleaner / Thinner: |
Clean up with warm soapy water |
Shelf Life: |
24 Months |
Sizes Available: |
Available in 5, 20, *200 and *1000 Litre Variants |
KEY FEATURES AND BENEFITS
- Effective concrete dustproofing
- Durable concrete sealer
- Low odour and solvent-free
- Will not blister or peel, hardens & seals concrete
- Gives additional protection to concrete surfaces
- Resists oil and stain penetration
- Easy to apply with a roller or sprayer
The recommended products used to apply this product are in the description below and highlighted in Blue.
PRODUCT DESCRIPTION
Everest Trade Paints - Concrete Dustproofer is a solvent-free, quick-drying concrete sealer with a low viscosity formula which provides a highly effective coating to prevent dust formation on new and existing concrete floors while providing low down-times and low odour application.
Solvent FREE concrete dustproofer that helps prevent dusting on porous concrete surfaces. It's frequently used to seal and prevent dust on concrete on garage floors and industrial floors.
Easy to apply by a roller or sprayer, gives additional protection to concrete surfaces.
Ideal for use as an undercoat prior to application of Everest Quick Drying Floor Paints on bare concrete floors in industrial, commercial and domestic areas due to its ability to penetrate deeper into the substrate providing a better surface to for the floor paint to adhere to and reducing the risk of delamination.
This product SHOULD BE USED as the primer and sealer for all our quick-drying floor paints for both internal and external applications.
However, if you're just planning on using this as a sealer without the intention of applying a topcoat we would recommend the Everest Trade Paints Polyurethane Concrete Sealer instead due to its highly durable base type or Everest Trade Paints Ultimate Concrete Sealer if you require a quick-drying, extra durable coating.
USES AND SURFACE COMPATIBILITY
Suitable for use as an undercoat for Floor paint on internal and external concrete floors and also a durable concrete sealer.
SPECIAL PROPERTIES
It is easily cleaned and will withstand regular washing. Also resistant to most stains and oils.
SPREADING RATE
- First coat: Approximately 5 square meters per litre.
- Second coat: Approximately 7 square meters per litre.
This is a rough estimate and varies depending on the condition of the driveway/floor and amount applied with each coat.
DRYING TIME
Under normal conditions, Sealer is touch dry in approximately 2-4 hours.
Do not drive on the surface for 24 hours after the last coat.
APPLICATION
Brush, Roller, or Sprayer.
We have compatible application tools Here.
Make sure the surface is 100% dry and free from any moisture or contaminants before application. Do not apply if there is any chance of rain.
Apply only one coat if being used as a primer prior to application of our floor paint, 2 if being used solely as a sealer/dustproofer.
STORAGE PRECAUTIONS
Store away from heat and naked flames. Secure lid between uses to prevent sealer hardening. Store away from frost.
THINNERS
Thinners aren't required with this product, warm soapy water can be used for clean up.
SURFACE PREPARATION
Ensure all surfaces to be sealed are clean, dry and free from oil and grease.
If applying on exterior surfaces, please ensure no rain is forecast and the surface is dry before application.