Everest Trade - Block Paving Sealer - High-Performance - Premium Polyurethane Sealer

BENEFITS AND KEY FEATURES

• Provides a high-performance seal coating
• Highly durable polyurethane based sealer
• Provides a premium satin finish
• Can be used in industrial and commercial environments
• 100% UV fade resistant
• Harden's sand joints to prevent weed formation
• Prevents moss, algae and lichen formation
• Long lasting and made with premium polyurethane resins

PRODUCT DESCRIPTION

Everest Trade high-performance block paving sealer is a solvent-borne, premium polyurethane resin-based sealer and jointing sand stabiliser with exceptional effectiveness. that will provide a heavy-duty, long-lasting clear seal coating with a satin / wet look finish.

Its penetration comes about by solvent evaporation, penetrating into the blocks and binding the particles of sand to form an elastomeric joint and protect the paver face from oil and water infiltration.

The sealer prevents moss and weed formation when applied correctly, joints should be re-sanded for optimum results.

100% UV light fade resistant, resistant to tyre plucks and resists oil stains and water damage.

Suitable for - commercial, public or industrial premises with heavy to extremely heavy traffic, this product is also perfect for use on residential driveways for customers that want an extra hard-wearing product.

Maintains the performance life of the pavement. Yields significant whole-life cost savings and reduces interim maintenance.
 
USES AND SURFACE COMPATIBILITY
Suitable for use on concrete block paving, brickwork and concrete. Not suitable for clay pavers.
 
COMPATIBLE PRODUCTS

Driveway Cleaner - Everest Trade Ultimate Driveway Cleaner

Oil Stain Remover - Everest Trade Oil Stain Remover

Efflorescence Remover - Everest Trade Efflorescence and Salts remover
 
SPECIAL PROPERTIES
It is easily cleaned and will withstand regular washing. Also resistant to most oils.
 
SPREADING RATE

• First coat:                Approximately 4 square meters per litre.
• Second coat:           Approximately 6 square meters per litre.

This is a rough estimate and varies depending on the condition of the driveway and the amount applied with each coat.

A third coat can be applied to give a more wet look finish if required.

 
DRYING TIME
Under normal conditions, it is touch dry in approximately 3-4 hours.
Do not drive on the surface for 24 hours after the last coat.
 
APPLICATION
Brush, Roller, or Sprayer.

Sprayers will provide the best results due to being less chance of interfering with the sanded joints.

Rollers and brushes are fine for application, be careful when going over joints for best results.

We have compatible application tools on our website.

Make sure the surface is 100% dry and free from any moisture or contaminants before application. Do not apply if there is any chance of rain.
 
STORAGE PRECAUTIONS
Store away from heat and flames. Secure the lid between uses to prevent sealer hardening. Store away from frost.
 
THINNERS
Thinners aren't required with this product, use white spirits or a proprietary brush clear for cleaning.
 
SURFACE PREPARATION
Ensure all surfaces to be sealed are clean, dry and free from oil and grease and there are a couple of days of good weather so there is no chance of rain during application.

APPLICATION

Brush, Roller, or Airless and compressor sprayer. 

Sprayers will provide the best results due to being less chance of interfering with the sanded joints.

Rollers and brushes are fine for application, be careful when going over joints for best results.

We have compatible application tools on our website.

Make sure the surface is 100% dry and free from any moisture or contaminants before application. Do not apply if there is any chance of rain./p>

  

SURFACE PREPARATION

Ensure all surfaces to be sealed are clean, dry and free from oil and grease and there are a couple of days of good weather so there is no chance of rain during application.
Ensure the surface is completely dry and free from condensation and damp.
 

PRODUCT TECHNICAL SPECIFICATIONS

Below are the technical specification of this coating, if you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call us on 01909 495708 and one of our staff members will be more than happy to provide you with the information needed.

Components:	1 Part - Single Pack.
Base Type:	Polyurethane Resin.
Finish:	Semi-gloss, Eggshell Finish.
Theoretical Coverage:	Approximately 4 - 6 square metres per litre, per coat.
Number of Coats:	2 Coats Recommended.
Coating Thickness:	50 Microns.
Suitable Substrates:	Standard Block Paving, Concrete Block Paving, Concrete Flags/Slabs, Concrete, and Cement.
Use Case (Interior / Exterior):	Internal and External.
Touch Dry Time:	2 - 4 Hours at 18°C
Overcoatable:	2 - 4 Hours at 18°C.
Pot Life:	Not applicable.
Primer Required?:	No primer required.
Colour Variation Count:	1 Colour(s) Available.
Application Method:	Brush, Roller, Airless Sprayer, and H.V.L.P Sprayer.
Cleaner / Thinner:	White Spirits and Standard Thinners.
Shelf Life:	24 Months if kept sealed and away from frost.
Sizes Available:	Available in 1 Litre 5 Litre 20 Litre 200 Litre 1000 Litre Variants.

DATA SHEETS AND PRODUCT FILES

Below are the all the products and files we have on this coating, if you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call us on 01909 495708 and one of our staff members will do their best to try and provide you with the information needed.

COVERAGE CALCULATOR

This is our coverage calculator, enter the size (m2) of the area you are looking to cover, then enter the amount of coats you are going to apply and it will inform you of the estimated quantity you will need based off of the products average coverage rates.

If you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call us on 01909 495708 and one of our staff members will be more than happy to provide you with the information needed.