Everest Trade - Concrete Dustproofer / Floor Primer & Sealer - Solvent Free - 20 & 5 Litre
A SOLVENT-FREE CONCRETE DUSTPROOFER AND FLOOR PRIMER
BENEFITS AND KEY FEATURES
- Effective concrete dustproofing
- Durable concrete sealer
- Low odour and solvent-free
- Will not blister or peel, hardens & seals concrete
- Gives additional protection to concrete surfaces
- Resists oil and stain penetration
- Easy to apply with a roller or sprayer
TO SEE THE COMPATIBLE OR RECOMMENDED PRODUCTS, SCROLL TO THE BOTTOM OF THE PAGE FOR RECOMMENDATIONS.
Everest Trade Paints - Concrete Dustproofer is a solvent-free, quick-drying concrete sealer with a low viscosity formula which provides a highly effective coating to prevent dust formation on new and existing concrete floors while providing low down-times and low odour application.
Solvent FREE concrete dustproofer that helps prevent dusting on porous concrete surfaces. It's frequently used to seal and prevent dust on concrete on garage floors and industrial floors.
Easy to apply by a roller or sprayer, gives additional protection to concrete surfaces.
Ideal for use as an undercoat prior to application of Everest Quick Drying Floor Paints on bare concrete floors in industrial, commercial and domestic areas due to its ability to penetrate deeper into the substrate providing a better surface to for the floor paint to adhere to and reducing the risk of delamination.
This product SHOULD BE USED as the primer and sealer for all our quick-drying floor paints for both internal and external applications.
However, if you're just planning on using this as a sealer without the intention of applying a topcoat we would recommend the Everest Trade Paints Polyurethane Concrete Sealer instead due to its highly durable base type or Everest Trade Paints Ultimate Concrete Sealer if you require a quick-drying, extra durable coating.
USES AND SURFACE COMPATIBILITY
Suitable for use as an undercoat for Floor paint on internal and external concrete floors and also a durable concrete sealer.
SPECIAL PROPERTIES
It is easily cleaned and will withstand regular washing. Also resistant to most stains and oils.
SPREADING RATE
- First coat: Approximately 5 square meters per litre.
- Second coat: Approximately 7 square meters per litre.
This is a rough estimate and varies depending on the condition of the driveway/floor and amount applied with each coat.
DRYING TIME
Under normal conditions, Sealer is touch dry in approximately 2-4 hours.
Do not drive on the surface for 24 hours after the last coat.
APPLICATION
Brush, Roller, or Sprayer.
We have compatible application tools Here.
Make sure the surface is 100% dry and free from any moisture or contaminants before application. Do not apply if there is any chance of rain.
Apply only one coat if being used as a primer prior to application of our floor paint, 2 if being used solely as a sealer/dustproofer.
STORAGE PRECAUTIONS
Store away from heat and flames. Secure lid between uses to prevent sealer hardening. Store away from frost.
THINNERS
Thinners aren't required with this product, warm soapy water can be used for clean up.
SURFACE PREPARATION
Ensure all surfaces to be sealed are clean, dry and free from oil and grease.
If applying on exterior surfaces, please ensure no rain is forecast and the surface is dry before application.
Disclaimer: There is a small possibility that your order may be delivered in white tins with the product label applied, this is rare but can occur in times of increased demand due to the manufacturer running out of printed tins due to a large spike in sales. You can confirm this with the manufacturer.
PRODUCT TECHNICAL SPECIFICATIONS
Below are the technical specification of this coating, if you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call us on 01909 495708 and one of our staff members will be more than happy to provide you with the information needed.
Components: |
1 Part - Single Pack. |
Base Type: |
Premium Acrylic Resin. |
Finish: |
Satin Finish. |
Theoretical Coverage: |
Approximately 5 - 7 square metres per litre, per coat. |
Number of Coats: |
1 Coat. |
Coating Thickness: |
50 Microns. |
Suitable Substrates: |
Concrete Floors, Concrete, Concrete Flags/Slabs, Cement, and Most porous surfaces. |
Use Case (Interior / Exterior): |
Internal and External. |
Touch Dry Time: |
2 - 4 Hours at 18°C |
Overcoatable: |
2 - 4 Hours at 18°C. |
Pot Life: |
Not applicable. |
Primer Required?: |
Not Applicable. |
Colour Variation Count: |
1 Colour(s) Available. |
Application Method: |
Brush, Roller, H.V.L.P Sprayer, Airless Sprayer, and Pump Sprayer. |
Cleaner / Thinner: |
Clean with soapy water. |
Shelf Life: |
24 Months if kept sealed and away from frost. |
Sizes Available: |
Available in 5 Litre 20 Litre 200 Litre 1000 Litre Variants. |
DATA SHEETS AND PRODUCT FILES
Below are the all the products and files we have on this coating, if you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call us on 01909 495708 and one of our staff members will do their best to try and provide you with the information needed.
Files and Data Sheets
COVERAGE CALCULATOR
This is our coverage calculator, enter the size (m2) of the area you are looking to cover, then enter the amount of coats you are going to apply
and it will inform you of the estimated quantity you will need based off of the products average coverage rates.
If you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call
us on 01909 495708 and one of our staff members will be more than happy to provide you with the information needed.
Coverage Calculator
Select Variant and Order
Including VAT
Inc VAT
Express Delivery Available!
Everest Trade - Concrete Dustproofer / Floor Primer & Sealer - Solvent Free - 20 & 5 Litre - 5 Litre / Clear is backordered and will ship as soon as it is back in stock.
*subject to stock levels at the time of your order.