Everest Trade - High Build Industrial Grade PU Resin Based Floor & Concrete Paint - Anti-Slip
In Stock! 24 Hour or 48 Hour Delivery Available On All Items!
- High-quality polyurethane resin based paint.
- Available in a wide range of colours.
- Anti-slip textured gloss finish.
- High build formula.
- Industrial quality.
- Great resistance to vehicles.
- Great for medium to high traffic areas.
- Heavy duty and long lasting.
- High durability and is easy to clean.
If you're looking for a product for exterior use click here to view the relevant item.
A single pack hard wearing, durable polyurethane resin based floor paint with added silica particles* for an effective anti-slip coating.
High durability against abrasion and impacts.
Made in England with Premium PU Resins.
Designed to seal, protect and colour interior concrete floors in industrial and agricultural areas.
It provides a tough petrol and oil resistant finish with excellent durability while also providing great tyre pluck properties good for areas with forklifts and work vehicles.
Ideal for use in factories, garages and on workshop floors.
Ensure all surfaces are sound and clean, free from dust and flaking paint.
Ensure surface is completely dry and free from condensation and damp.
Remove any loose or flaking paint.
If bare concrete is being painted it is advised a base coat of "Everest Trade polyurethane floor primer and sealer" is used to get the best results as the primer will provide a penetrating base coat for the top coat to anchor to.
Red, Blue, Black, White, Dark Grey, Grey, Light Grey, JCB Yellow and Green as well as British standard colours or RAL colours if ordered in bulk.
Click here for a colour chart.
SPREADING RATE (Coverage)
Approximately 5 - 7 square metres per litre.
Under normal circumstances, it should be touch dry in 6 hours if well ventilated and conditions are dry.
Brush, Roller, or Spray.
Mix thoroughly before use with a paddle mixer drill attachment.
Two coats should be applied thinly and evenly to provide maximum hardness when dry and to minimise drying times.
Make sure the surface is 100% dry and free from any moisture or contaminants before application.
Store away from heat and naked flames. Secure lid between uses to prevent paint hardening.
White Spirit or Turpentine Substitute can be used for thinning.
We recommend ordering all the paint required in one order so you receive the same batch, Ordering on different dates will result in receiving different batches which may result in a shade difference.
This is fine if you are planning on using the different batches on different coats, However, it's not recommended to use on the same coat.
*only if the anti-slip option is selected.