KEY FEATURES AND BENEFITS

Highly durable solvent based paint
Industrial quality
Heavy duty and long lasting
High durability and is easy to clean
Prevents corrosion and rust formation
Brushable and sprayable
An oxide gloss based on a synthetic alkyd resin

Any products compatible with this item will be highlighted in Blue, Click the link to view.

PRODUCT DESCRIPTION
Everest Trade Paints - Agricultural and Industrial Barn and Shed Paint is a highly durable, solvent-based paint made from a heavy-duty, synthetic alkyd resin ensuring a long-lasting, durable coating.

Designed for use on metal, wood, concrete and other substrates (see below) on the exterior and interior cladding of agricultural barns, sheds, industrial units, factories and various other buildings.

Available in a large range of colours, finishes and sizes with custom colour tinting available on larger orders.

This product is designed to be tough and durable paint which will provide an easily cleanable coating while protecting the surface from rust and weather damage.

Can be easily applied by brush, roller or airless sprayer to metal cladding and other surfaces including wood, concrete and brickwork.

SURFACE PREPARATION
Ensure all surfaces are sound and clean, free from dust and flaking paint.
Ensure surface is completely dry and free from condensation and damp.

Remove any loose or flaking paint.

Areas of bare, uncoated metal or areas with exposed rust should be primed with a coat of Everest Trade - Anti-Corrosive Oxide Primer for maximum adhesion.

SUITABLE SUBSTRATES
Wood, metal, concrete, brickwork and other porous substrates.

COLOURS AVAILABLE
Anthracite Grey
Battleship Grey
Light Grey
Ford Tractor Blue
Oxford Blue
Tile Red
Dark Brunswick Green
Mid Brunswick Green
Juniper Green
Nut Brown (RAL 8011)
Bright Orange
Post Office Red
JCB Yellow
Brick Red
Magnolia
Black
White

Click here to view the colour chart

This product can also be mixed to any BS 4800 and RAL colours for orders of at least 100 litres.

SPREADING RATE (Coverage)
Approximately 6 - 8 square metres per litre, per coat.*
*This varies, apply in thin even coats to ensure maximum durability and lower drying times.

DRYING TIME

Touch Dry:	6-8 hours at 18°C
Overcoatable:	6-8 hours at 18°C
Fully Cured:	7 days at 18°C

APPLICATION
Brush, Roller, or Airless and compressor sprayer.

Mix thoroughly before use with a paddle mixer drill attachment.

Two coats should be applied thinly and evenly to provide maximum protection and to achieve lower drying times.

Make sure the surface is 100% dry and free from any moisture or contaminants before application.

STORAGE PRECAUTIONS
Store away from heat and naked flames. For long term storage, keep away from frost. Secure lid between uses to prevent paint hardening.

COMPATIBLE PRIMER
The primer to be used with this product is Everest Trade - Anti-Corrosive - Metal Oxide Primer Paint.

CLEANER / THINNERS
This product can be thinned with standard White spirits, thinning should only be done if the product is being sprayed and the sprayer is unable to spray the product un-thinned. Up to 15% white spirits can be added, try and add as little white spirits as possible until spraying is possible to ensure maximum quality.
Cleaning brushes and equipment should be done with White spirits.

BATCH INFORMATION
We recommend ordering all the paint required in one order so you receive the same batch, ordering on different dates will result in receiving different batches which may result in a shade difference.
This is fine if you are planning on using the different batches on different coats, However, it's not recommended to use on the same coat.

Need Application Accessories?

Some Helpful Pages

Filters

Brand

Category