
SummitSeal - Sealer Repair Fluid - Removes Surface Whiteness
TRADE GRADE SEALER REPAIR FLUID
BENEFITS AND KEY FEATURES
- 100% UV fade resistant
- The main sealer type used by the trade professionals
- For use with Summitseal xylene based sealers
- Corrects issues due to moisture in xylene based sealers
- Solvent-based repair compound
- Can be used with imprinted concrete and block sealers
TO SEE THE COMPATIBLE OR RECOMMENDED PRODUCTS, SCROLL TO THE BOTTOM OF THE PAGE FOR RECOMMENDATIONS.
PRODUCT DESCRIPTION
SummitSeal sealer repair fluid is as the name suggests a solvent-borne repair fluid that will easily correct issues if the xylene based imprinted concrete or block paving sealers have been applied in conditions when the surface is damp this can lead to problems. Surface whiteness is the most common issue and appears over time if the sealer has been applied when the surface is damp. This product will remove xylene based sealers from the surfaces applied to.
This product can repair/fix the following products:
SUMMITSEAL - BLOCK PAVING SEALER - SATIN - HIGHLY DURABLE, SAND HARDENER - TRADE GRADE
SUMMITSEAL - BLOCK PAVING SEALER - MATT - HIGHLY DURABLE, SAND HARDENER - TRADE GRADE
SUMMITSEAL - IMPRINTED CONCRETE SEALER - SATIN / WETLOOK - HIGHLY DURABLE - TRADE GRADE
SUMMITSEAL - IMPRINTED CONCRETE SEALER - MATT - HIGHLY DURABLE - TRADE GRADE
This product should be used when problems like patchy whiteness have appeared on the surface of existing imprinted concrete or block paved driveways and patios. Surface whiteness, peeling or flaking sealer are common issues that are easily corrected using sealer repair fluid.
USES AND SURFACE COMPATIBILITY
Suitable for use on concrete, block paving and imprinted concrete.
SPECIAL PROPERTIES
It is easily cleaned and will withstand regular washing. Also resistant to most oils.
SPREADING RATE
- First coat: Approximately 3 square meters per litre.
- Second coat: Approximately 4 square meters per litre.
This is a rough estimate and varies depending on the condition of the driveway and the amount applied with each coat.
DRYING TIME
Under normal conditions, it is touch dry in approximately 3-4 hours.
Do not drive on the surface for 24 hours after the last coat.
STORAGE PRECAUTIONS
Store away from heat and flames. Secure lid between uses to prevent paint hardening. Store away from frost.
THINNERS
Thinners aren't required with this product, use xylene or proprietary brush clear for cleaning.
SURFACE PREPARATION
Ensure all surfaces to be sealed are clean, dry and free from oil and grease and there are a couple of days of good weather so there is no chance of rain during application.
APPLICATION
For imprinted concrete it should be liberally applied to the affected area, left for a couple of minutes and then worked into the surface vigorously with a soft broom until the sealer goes "tacky" under your broom. This will show you have 'softened' the sealer and you then allow it to re-bond to the concrete by leaving it.
For removal of surface whiteness on block paving repeat as instructions above, but with block paving be careful not to disturb the jointing sand when working the sealer repair fluid into the surface of the blocks.
PRODUCT TECHNICAL SPECIFICATIONS
Below are the technical specification of this coating, if you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call us on 01909 495708 and one of our staff members will be more than happy to provide you with the information needed.
Components: |
. |
Base Type: |
. |
Finish: |
Finish. |
Theoretical Coverage: |
|
Number of Coats: |
. |
Coating Thickness: |
. |
Suitable Substrates: |
. |
Use Case (Interior / Exterior): |
. |
Touch Dry Time: |
|
Overcoatable: |
. |
Fully Cured: |
. |
Pot Life: |
. |
Primer Required?: |
. |
Colour Variation Count: |
Colour(s) Available. |
Application Method: |
. |
Cleaner / Thinner: |
. |
Shelf Life: |
. |
Sizes Available: |
Available in Variants. |
DATA SHEETS AND PRODUCT FILES
Below are the all the products and files we have on this coating, if you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call us on 01909 495708 and one of our staff members will do their best to try and provide you with the information needed.
Files and Data Sheets
COVERAGE CALCULATOR
This is our coverage calculator, enter the size (m2) of the area you are looking to cover, then enter the amount of coats you are going to apply
and it will inform you of the estimated quantity you will need based off of the products average coverage rates.
If you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call
us on 01909 495708 and one of our staff members will be more than happy to provide you with the information needed.
Coverage Calculator
You will need approximately:
*This is intended to be used as a rough guide only and is based on the average coverage of this product, the actual coverage on your surface may vary widely depending on your surface porosity.
Including VAT
Inc VAT
Free Delivery on all orders over £100!
*subject to stock levels at the time of your order.