Everest Trade - PremFlex Ultimate Roof Tile Paint & Sealer - High Performance Formula

BENEFITS AND KEY FEATURES

• Premium, highly durable roof tile paint and sealer.
• DESIGNED TO LAST FOR A 10-YEAR LIFE.
• Advanced high-bond, acrylic polymer coating system.
• Heavy-duty, easy-clean satin finish.
• Roof tile sealant and colour restoration in a single product.
• UV light resistant to stop the colour from fading.
• Excellent resistance to cracking, flaking and blistering.
• Waterproof and great weather resistance.
• Breathable, flexible fully acrylic formula.
• Excellent colour retention.

Everest Trade - PremFlex Ultimate Roof Tile Paint & Sealer - High Performance is a single pack, quick-drying, low odour paint and sealer based on an advanced high-bond, acrylic polymer resin which means maximum adhesion, high durability and great, long-lasting colour retention. 

As your roof ages, it will start looking dull, tired and faded. The British weather is notoriously harsh on untreated roofs, weather like rain, sleet, snow and frost will overtime make your roof less water-resistant allowing algae, lichens and moss to develop. This is where PremFlex Ultimate Roof Paint comes in, it will enhance the roof, bringing back all the lost colour, making the roof look as if it was just installed while also fully resealing and waterproofing the surface providing protection against previously mentioned algae, lichens and moss. 

This paint offers damage-resilience, lasting flexibility and waterproofing. It is designed to let out water and moisture for long-term protection against the harsh conditions of the British weather, preventing weather damage for the worst the weather has to offer.

Available in a range of colours, this paint is ideal for any renovation project, or to protect roof tiles from serious damage while simultaneously restoring colour from faded tiles.

Made in England with Premium Acrylic Polymer Resin.

SURFACE PREPARATION
Ensure all surfaces are sound, dry and clean, free from dust and any loose or flaking paint.

If the area has any green moss, algae or lichens, it's recommended to apply a good quality roof cleaner containing a biocide to kill the growths before application to ensure proper removal.

Then pressure wash the surface ensuring the roof is totally clean, dry and free from moss, algae or lichen spores.
Ensure surface is completely dry and free from condensation and damp before application.

COLOURS AVAILABLE
Light Grey, Battleship Grey, Charcoal Anthracite, Black, Rustic Red, Terracotta, Brown, Green and all standard RAL and BS colours if ordered in bulk.

This coating is fine for use on concrete roof tiles, concrete, clay roof tiles (except rosemary tiles), cement fibre, artificial slate and asbestos sheets & tiles. This product CAN'T be used on plastic tiles. 
 
SPREADING RATE (Coverage)
Approximately 5 - 7 square metres per litre, per coat.
 
DRYING TIME
Under normal circumstances, it should be touch dry in 2 - 4 hours if well ventilated and conditions are dry.
 
APPLICATION
Brush, roller, or airless sprayer.

Mix thoroughly before use with a paddle mixer drill attachment.
Make sure the surface is 100% dry and free from any moisture or contaminants before application.

Apply 2 thin, even coats to ensure durability.
 
STORAGE PRECAUTIONS
Store away from heat and flames. Secure lid between uses to prevent paint hardening.
 
THINNERS
Can be let down with water if needed. Not recommended unless spraying.
 
SURFACE PREPARATION
Ensure all surfaces are sound and clean, free of algae and moss. 
Ensure the surface is completely dry and free from condensation and damp.
Remove any loose or flaking paint.

BATCH INFORMATION (Important)
We recommend ordering all the paint required in one order so you receive the same batch, Ordering on different dates will result in receiving different batches which may result in a shade difference.
This is fine if you are planning on using the different batches on different coats, However, it's not recommended to use on the same coat.

PRODUCT TECHNICAL SPECIFICATIONS

Below are the technical specification of this coating, if you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call us on 01909 495708 and one of our staff members will be more than happy to provide you with the information needed.

DATA SHEETS AND PRODUCT FILES

Below are the all the products and files we have on this coating, if you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call us on 01909 495708 and one of our staff members will do their best to try and provide you with the information needed.

Files and Data Sheets

MSDS - Material Safety Data Sheet

PCC - Product Colour Chart

COVERAGE CALCULATOR

This is our coverage calculator, enter the size (m2) of the area you are looking to cover, then enter the amount of coats you are going to apply and it will inform you of the estimated quantity you will need based off of the products average coverage rates.

If you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call us on 01909 495708 and one of our staff members will be more than happy to provide you with the information needed.