Easy application
Ready in 4 simple steps
Step 1 — Clean & Prepare
Ensure the surface is clean, dry and free from dirt, oil and grease. Sand back any glossy areas.
Step 2 — Prime the Surface
Apply one coat of Everest Floor Primer. Touch dry in 2–4 hours. Skip this step if recoating previously painted concrete.
Step 3 — Apply First Coat
Roll or brush on the first coat evenly. Touch dry in 2–4 hours. Coverage: 6–8m² per litre.
Step 4 — Apply Second Coat
Apply the second coat once the first is touch dry. Allow 24 hours before foot traffic.
Everest - Ultimate QD Concrete Floor / Patio Paint & Sealer - Internal & External - Anti-Slip
Performance & Key Features
Engineered for durability and fast application
Quick Drying Performance
Fast-curing coating, touch dry in 2-4 hours for reduced downtime
Built for Durability
Resists foot traffic, wear and surface impact over time.
Multi-Surface Application
Suitable for use on patios, driveways and concrete floors.
Quality Assured Manufacturing
Produced to ISO:9001 standards for consistent, long-term performance
At a Glance
Walkable in 2-4 hrs
Touch dry, fast.
Internal & External Use
Indoor & outdoor
UV & Weather Resistant
Fade resistant finish
Vehicle Traffic Ready
Handles cars & foot traffic
Anti-Slip Option
Improved grip & safety
Made in Britain
Made in Nottinghamshire
Select Variant and Order
£45.79 (ex VAT)
Express Delivery Available!
Everest - Ultimate QD Concrete Floor / Patio Paint & Sealer - Internal & External - Anti-Slip - 5 Litre / Black / No is backordered and will ship as soon as it is back in stock.
*subject to stock levels at the time of your order.
Click an icon to explore features
BENEFITS AND KEY FEATURES
- Quick-drying formula
- Available in a wide range of colours
- Anti-slip textured semi gloss finish (With anti-slip option)
- Semi-gloss finish (Without anti-slip option)
- High build, high performance formula
- UV resistant
- Excellent resistance to cracking, flaking and blistering
- Great foot traffic resistance.
- Can be used internally and externally!
- Excellent colour retention
PRODUCT DESCRIPTION
Everest Trade - Quick Drying Ultimate QD Concrete Floor Paint & Sealer is a single pack, quick-drying, low odour paint and sealer with the option added silica particles* for an effective anti-slip coating. Designed to give a durable, easy clean protective finish to concrete interior and exterior floors, slabs and other concrete surfaces.
Everest Trade Paints new acrylic-based concrete paint and sealer gives great durability, foot traffic and impact resistance while providing a nice decorative semi-gloss finish with its high colour retention and UV resistance.
This also gives some protection against solvent, salt and water damage.
Especially suited for exterior and interior concrete surfaces such as slabs, block paving and concrete floors that require a refresh.
Also ideal for garages, driveways, patios, internal concrete floors and external concrete areas.
Made in England with Premium Acrylic Resins.
SURFACE PREPARATION
Ensure all surfaces are sound and clean, free from dust and flaking paint.
Ensure surface is completely dry and free from condensation and damp.
Remove any loose or flaking paint.
If bare or unpainted concrete is being painted it is strongly advised a base coat of "Everest Trade Quick Drying Floor Primer and Sealer" is used to get the best results as the primer will provide a penetrating base coat for the topcoat to anchor to, this will ensure good adhesion of the paint.
Can be easily applied by brush, roller or airless sprayer to all concrete floors, polished or power floated will need to be etched / scarified prior to application to minimise the chance of delamination. This paint cannot be applied over oil/solvent-based paints, it may react. (Ensure this product is compatible with your type of floor before application). Can not be used on concrete with protruding natural stones as it will struggle to adhere to the natural stones due to porosity.
Can be used on standard concrete, Powerfloated and polished concrete floors must be ground using a floor grinder prior to the application of the primer/sealer linked in the application section. Not recommended for use on self-levelling floors as they tend to be non-porous.
COLOURS AVAILABLE
Light Grey, Grey, Dark Grey, Black, White, Magnolia, Classic Cream, Bright Red, Brick Red, Black, Yellow, Blue, Green and all standard RAL and BS colours if ordered in bulk.
Click here to view the colour chart.
SPREADING RATE (Coverage)
Approximately 6 - 8 square metres per litre, this can vary widely based on surface porosity.
STORAGE PRECAUTIONS
Store away from heat and flames. Secure lid between uses to prevent paint hardening.
THINNERS
Can be let down with water if needed. Not Recommended.
SURFACE PREPARATION
Ensure all surfaces are sound and clean, free of algae and moss.
Ensure the surface is completely dry and free from condensation and damp.
Remove any loose or flaking paint.
BATCH INFORMATION
We recommend ordering all the paint required in one order so you receive the same batch, Ordering on different dates will result in receiving different batches which may result in a shade difference.
This is fine if you are planning on using the different batches on different coats, However, it's not recommended to use on the same coat.
*only if the anti-slip option is selected.
Disclaimer: There is a small possibility that your order may be delivered in white tins with the product label applied, this is rare but can occur in times of increased demand due to the manufacturer running out of printed tins due to a large spike in sales. You can confirm this with the manufacturer.
PRODUCT TECHNICAL SPECIFICATIONS
Below are the technical specification of this coating, if you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call us on 01909 495708 and one of our staff members will be more than happy to provide you with the information needed.
Components: |
1 Part - Single Pack. |
Base Type: |
Premium Acrylic Resin. |
Finish: |
Satin Finish. |
Theoretical Coverage: |
Approximately 6 - 8 square metres per litre, per coat. |
Number of Coats: |
2 Coats Recommended. |
Coating Thickness: |
50 Microns. |
Suitable Substrates: |
Concrete, Concrete Floors, Wood, Existing well bonded paint, Metal, Most porous surfaces, Cement, Concrete Block Paving, Standard Block Paving, and Concrete Flags/Slabs. |
Use Case (Interior / Exterior): |
Internal and External. |
Touch Dry Time: |
2 - 4 Hours at 18°C |
Overcoatable: |
2 - 4 Hours at 18°C. |
Fully Cured: |
Not applicable. |
Pot Life: |
Not applicable. |
Primer Required?: |
If bare or unpainted concrete is being painted it is strongly advised a base coat of "Everest Trade Quick Drying Floor Primer and Sealer" is used. |
Colour Variation Count: |
16 Colour(s) Available. |
Application Method: |
Brush, Roller, H.V.L.P Sprayer - Non anti-slip only, and Airless Sprayer - Non anti-slip only. |
Cleaner / Thinner: |
Clean with soapy water. |
Shelf Life: |
24 Months if kept sealed and away from frost. |
Sizes Available: |
Available in 5 Litre 20 Litre 200 Litre Variants. |
DATA SHEETS AND PRODUCT FILES
Below are the all the products and files we have on this coating, if you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call us on 01909 495708 and one of our staff members will do their best to try and provide you with the information needed.
Files and Data Sheets
COVERAGE CALCULATOR
This is our coverage calculator, enter the size (m2) of the area you are looking to cover, then enter the amount
of coats you are going to apply and it will inform you of the estimated quantity you will need based off of the
products average coverage rates.
If you require anymore information on this product, please email us at
sales@premiumpaints.co.uk or call us on
01909 495708 and one of our staff members will be more than happy to provide you
with the information needed.
Coverage Calculator
