Product Key Features:
Elevates the visual appeal of patios while providing a protective layer against staining and UV damage.
Specially formulated for pre-cast concrete slabs and flagstones, ensuring optimal performance.
Offers resistance to common stains and increased abrasion resistance for a lasting finish.
Can be applied with a roller or sprayer for a quick and uniform coverage.
Everest Trade Paints - Patio Sealer For Concrete Slabs and Flagstones - Available in 20 and 5 litre
PATIO SEALER FOR CONCRETE SLABS AND FLAGSTONES
BENEFITS AND KEY FEATURES
- Enhances natural colours in pre-cast concrete and flagstones
- Fully seals and protects patio slabs against UV light to prevent fading
- Revives your old patio slabs to bring them back to their original colour
- Resists oil and stain penetration
- Durable, long-lasting sealer
- Inhibits mould and algae growth
- Average coverage of 4-6 square meters per litre
- Easy to apply by a roller or sprayer
PRODUCT DESCRIPTION
Everest Trade Paints - Patio Sealer is a highly durable, polyurethane-based sealer for use on pre-cast concrete slabs and flagstones.
This product enhances the colour of the patio while protecting the surface from staining, UV light, mould and algae growth and will increase abrasion resistance while also protect the pointing of the patio from erosion and weed infestation to reduce maintenance.
Easy to apply by a roller or sprayer, gives additional protection to your patio slabs.
USES AND SURFACE COMPATIBILITY
Suitable for use on exterior patio slabs and flagstones made from pre-cast concrete. Do not use on natural stone or sandstone
SPECIAL PROPERTIES
It is easily cleaned and will withstand regular washing. Also resistant to most stains and oils.
SPREADING RATE
- First coat: Approximately 4 square meters per litre.
- Second coat: Approximately 6 square meters per litre.
This is a rough estimate and varies depending on the condition of the slabs/flagstones and amount applied with each coat.
DRYING TIME
Under normal conditions, Sealer is touch dry in approximately 2-4 hours.
Fully cured 24 hours after the last coat.
APPLICATION
Brush, Roller, or Sprayer.
We have compatible application tools Here.
Make sure the surface is 100% dry and free from any moisture or contaminants before application. Do not apply if there is any chance of rain.
STORAGE PRECAUTIONS
Store away from heat and flames. Secure lid between uses to prevent sealer hardening. Store away from frost.
THINNERS
Thinners aren't required with this product, warm soapy water can be used for clean up.
SURFACE PREPARATION
Ensure all surfaces to be sealed are clean, dry and free from oil and grease.
If applying on exterior surfaces, please ensure no rain is forecast and the surface is dry before application.
Disclaimer: There is a small possibility that your order may be delivered in white tins with the product label applied, this is rare but can occur in times of increased demand due to the manufacturer running out of printed tins due to a large spike in sales. You can confirm this with the manufacturer.
Safety Disclaimer: This oil-based paint contains solvents and should be used in a well-ventilated area. Avoid inhalation of vapours and prolonged skin contact. Keep away from heat, sparks, and open flames. Always wear appropriate protective equipment, including gloves and a mask if required. Dispose of any waste in accordance with local regulations. Keep out of reach of children. For full safety information, refer to the product’s Safety Data Sheet (SDS).
PRODUCT TECHNICAL SPECIFICATIONS
Below are the technical specification of this coating, if you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call us on 01909 495708 and one of our staff members will be more than happy to provide you with the information needed.
Components: |
1 Part - Single Pack. |
Base Type: |
Polyurethane Resin. |
Finish: |
Satin / Wetlook Finish Finish. |
Theoretical Coverage: |
Approximately 5 - 6 square metres per litre, per coat. |
Number of Coats: |
2 Coats Recommended. |
Coating Thickness: |
50 Microns. |
Suitable Substrates: |
Standard Block Paving, Concrete Block Paving, Concrete, Concrete Floors, Concrete Flags/Slabs, and Imprinted Concrete. |
Use Case (Interior / Exterior): |
Internal and External. |
Touch Dry Time: |
2 - 4 Hours at 18°C |
Overcoatable: |
4 Hours at 18°C. |
Pot Life: |
Not applicable. |
Primer Required?: |
Not Applicable. |
Colour Variation Count: |
1 Colour(s) Available. |
Application Method: |
Brush, Roller, Airless Sprayer, H.V.L.P Sprayer, and Pump Sprayer. |
Cleaner / Thinner: |
White Spirits and Standard Thinners. |
Shelf Life: |
24 Months if kept sealed and away from frost. |
Sizes Available: |
Available in 5 Litre 20 Litre 200 Litre 1000 Litre Variants. |
DATA SHEETS AND PRODUCT FILES
Below are the all the products and files we have on this coating, if you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call us on 01909 495708 and one of our staff members will do their best to try and provide you with the information needed.
Files and Data Sheets
COVERAGE CALCULATOR
This is our coverage calculator, enter the size (m2) of the area you are looking to cover, then enter the amount of coats you are going to apply
and it will inform you of the estimated quantity you will need based off of the products average coverage rates.
If you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call
us on 01909 495708 and one of our staff members will be more than happy to provide you with the information needed.
Coverage Calculator
Select Variant and Order
Including VAT
Inc VAT
Express Delivery Available!
Everest Trade Paints - Patio Sealer For Concrete Slabs and Flagstones - Available in 20 and 5 litre - 5 Litre is backordered and will ship as soon as it is back in stock.
*subject to stock levels at the time of your order.
