Everest Trade Paints - Ultimate Limestone Sealer - Satin Finish - Impregnating Formula
ULTIMATE IMPREGNATING LIMESTONE SEALER - SATIN FINISH
BENEFITS AND KEY FEATURES
- One coat application to saturation (for best results apply a 2nd coat when the first coat has fully dried)
- Enhances natural colours in the stone leaving a premium satin finish
- Fully seals and protects the patio against UV light to prevent fading
- Revives your old patio to bring them back to their original colour
- Resists oil and stain penetration
- Durable, long-lasting sealer
- Inhibits mould, lichen and algae growth
- Average coverage of 5-7 square meters per litre
- Lifespan of up to 5 years can be expected
TO SEE THE COMPATIBLE OR RECOMMENDED PRODUCTS, SCROLL TO THE BOTTOM OF THE PAGE FOR RECOMMENDATIONS.
Everest Trade Paints - Ultimate Limestone Sealer is a durable, quick-drying, impregnating sealer for use on Indian sandstone, natural stone, limestone, granite and slate.
Its highly effective impregnating formula means that this sealer provides a durable, long-lasting (lifespan of up to 5 years) coating with excellent water repellency, stain and algae resistance and great wear resistance while also providing a premium satin finish to the surface.
This product enhances the colour of the patio while protecting the surface from staining, UV light, mould and algae growth and will increase abrasion resistance while also protecting the pointing of the patio from erosion and weed infestation to reduce maintenance.
Easy to apply by a roller or sprayer, gives additional protection to your patio slabs.
USES AND SURFACE COMPATIBILITY
Suitable for use on interior and exterior surfaces made from Indian sandstone, natural stone, limestone, granite and slate.
Not to be used on areas grouted with Easy grout or other resin-based grouts.
SPECIAL PROPERTIES
It is easily cleaned and will withstand regular washing. Also resistant to most stains and oils.
SPREADING RATE
- First coat: Approximately 5 square meters per litre.
- Second coat: Approximately 7 square meters per litre.
This is a rough estimate and varies depending on the condition of the patio/surface and the amount applied with each coat.
DRYING TIME
Under normal conditions, Sealer is touch dry in approximately 2-4 hours.
Do not drive on the surface for 24 hours after the last coat.
SURFACE PREPARATION
Ensure all surfaces to be sealed are clean, dry and free from oil, efflorescence and grease.
This product is not suitable if surfaces have been treated previously with a silicon or stearate based water repellent
If applying on exterior surfaces, please ensure no rain is forecast and the surface is completely bone dry before application.
APPLICATION
Brush, Roller, or Sprayer.
We have compatible application tools Here.
Always test a small area before use to ensure compatibility and that the finished result is acceptable
Do not pour the product directly onto the surface of the paving
Apply in thin, even coats to avoid any issues with the finish and to prevent problems with whiteness.
Make sure the surface is 100% dry and free from any moisture or contaminants before application. Do not apply if there is any chance of rain.
Do not allow the product to pool or the final appearance may not be even in colour on the paving to be enhanced and sealed.
STORAGE PRECAUTIONS
Store away from heat and flames. Secure the lid between uses to prevent sealer hardening. Store away from frost.
THINNERS
Thinners aren't required with this product, warm soapy water can be used for cleanup.
PRODUCT TECHNICAL SPECIFICATIONS
Below are the technical specification of this coating, if you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call us on 01909 495708 and one of our staff members will be more than happy to provide you with the information needed.
Components: |
1 Part - Single Pack. |
Base Type: |
Premium Acrylic Resin. |
Finish: |
Satin Finish. |
Theoretical Coverage: |
Approximately 5 - 7 square metres per litre, per coat. |
Number of Coats: |
2 Coats Recommended. |
Coating Thickness: |
50 Microns. |
Suitable Substrates: |
Limestone, Natural Stone, Slate (Not Black Slate), Indian Sandstone, Concrete, Most porous surfaces, Stone, Cement, Concrete Floors, Concrete Block Paving, Standard Block Paving, and Concrete Flags/Slabs. |
Use Case (Interior / Exterior): |
Internal and External. |
Touch Dry Time: |
2 - 4 Hours at 18°C |
Overcoatable: |
2 - 4 Hours at 18°C. |
Pot Life: |
Not applicable. |
Primer Required?: |
Not Applicable. |
Colour Variation Count: |
1 Colour(s) Available. |
Application Method: |
Brush, Roller, Airless Sprayer, H.V.L.P Sprayer, and Pump Sprayer. |
Cleaner / Thinner: |
Clean with soapy water. |
Shelf Life: |
24 Months if kept sealed and away from frost. |
Sizes Available: |
Available in 1 Litre 5 Litre 20 Litre 200 Litre 1000 Litre Variants. |
DATA SHEETS AND PRODUCT FILES
Below are the all the products and files we have on this coating, if you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call us on 01909 495708 and one of our staff members will do their best to try and provide you with the information needed.
Files and Data Sheets
COVERAGE CALCULATOR
This is our coverage calculator, enter the size (m2) of the area you are looking to cover, then enter the amount of coats you are going to apply
and it will inform you of the estimated quantity you will need based off of the products average coverage rates.
If you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call
us on 01909 495708 and one of our staff members will be more than happy to provide you with the information needed.
Coverage Calculator
You will need approximately:
*This is intended to be used as a rough guide only and is based on the average coverage of this product, the actual coverage on your surface may vary widely depending on your surface porosity.
Including VAT
Inc VAT
Free Delivery on all orders over £100!
*subject to stock levels at the time of your order.
