Product Key Features:
Delivers a satin, wet-look finish to concrete floors, enhancing appearance and durability.
Suitable for both indoor and outdoor use, providing a versatile sealing solution.
The solvent-borne PU resin formula offers exceptional protection against traffic, stains, and weather.
Outperforms standard sealers with greater resistance to wear and abrasion.
Everest Trade - Concrete Sealer - Polyurethane (PU) Resin Based - Internal and External
HIGH PERFORMANCE POLYURETHANE CONCRETE SEALER
BENEFITS AND KEY FEATURES
- Manufactured with a premium polyurethane resin, resulting in a more durable sealer than other solvent-based sealers using acrylic resins
- Gives concrete superb long-term protection
- Provides a tough and durable high-performance seal coating
- Will not blister or peel, hardens & seals concrete permanently
- Reduces efflorescence from concrete
- Resists oil and stain penetration
- Easy to apply with a roller or sprayer
- Long-lasting and made with premium polyurethane resins
TO SEE THE COMPATIBLE OR RECOMMENDED PRODUCTS, SCROLL TO THE BOTTOM OF THE PAGE FOR RECOMMENDATIONS.
PRODUCT DESCRIPTION
Everest Trade Paints Concrete Sealer is a solvent-borne, polyurethane resin-based sealer with exceptional effectiveness, This sealer will provide a heavy-duty, long-lasting clear seal coating with a satin / wet look finish.
This product can be used internally (good ventilation required) and externally on domestic and industrial surfaces due to it's heavy-duty polyurethane resin base.
Its penetration comes about by solvent evaporation, Penetrating into the concrete to protect the surface from oil and water infiltration while also dustproofing the surface.
100% UVA resistant, resistant to tyre plucks and provides high resistance to oil stains, foot and vehicle traffic and water damage.
Maintains the performance life of the concrete. Yields significant whole life cost savings and reduces interim maintenance.
Made in England with Premium PU Resins.
More durable than other "solvent-based" sealers that use an inferior acrylic resin.
USES AND SURFACE COMPATIBILITY
Suitable for use on exterior concrete floors and driveways.
SPECIAL PROPERTIES
It is easily cleaned and will withstand regular washing. Also resistant to most oils.
SPREADING RATE
- First coat: Approximately 4 square meters per litre.
- Second coat: Approximately 6 square meters per litre.
This is a rough estimate and varies depending on the condition of the driveway and amount applied with each coat.
DRYING TIME
Under normal conditions, it is touch dry in approximately 4 hours.
Do not drive on the surface for 24 hours after the last coat.
APPLICATION
Apply by brush, roller, conventional H.V.L.P or airless spray.
We have compatible application tools here.
We recommend you apply 2 coats of this sealer for the best performance and finish.
STORAGE PRECAUTIONS
Store away from heat and flames. Secure the lid between uses to prevent paint hardening. Store away from frost.
THINNERS
Thinners aren't required with this product, use white spirits or a proprietary brush clear for cleaning.
SURFACE PREPARATION
Ensure all surfaces to be sealed are clean, 100% dry and free from oil and grease and there are a couple of days of good weather so there is no chance of rain during application.
Disclaimer: There is a small possibility that your order may be delivered in white tins with the product label applied, this is rare but can occur in times of increased demand due to the manufacturer running out of printed tins due to a large spike in sales. You can confirm this with the manufacturer.
Safety Disclaimer: This oil-based paint contains solvents and should be used in a well-ventilated area. Avoid inhalation of vapours and prolonged skin contact. Keep away from heat, sparks, and open flames. Always wear appropriate protective equipment, including gloves and a mask if required. Dispose of any waste in accordance with local regulations. Keep out of reach of children. For full safety information, refer to the product’s Safety Data Sheet (SDS).
PRODUCT TECHNICAL SPECIFICATIONS
Below are the technical specification of this coating, if you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call us on 01909 495708 and one of our staff members will be more than happy to provide you with the information needed.
Components: |
1 Part - Single Pack. |
Base Type: |
Polyurethane Resin. |
Finish: |
Semi-gloss, Eggshell Finish. |
Theoretical Coverage: |
Approximately 4 - 6 square metres per litre, per coat. |
Number of Coats: |
2 Coats Recommended. |
Coating Thickness: |
50 Microns. |
Suitable Substrates: |
Concrete, Concrete Floors, Concrete Flags/Slabs, and Most porous surfaces. |
Use Case (Interior / Exterior): |
Internal and External. |
Touch Dry Time: |
2 - 4 Hours at 18°C |
Overcoatable: |
2 - 4 Hours at 18°C. |
Pot Life: |
Not applicable. |
Primer Required?: |
No primer required. |
Colour Variation Count: |
1 Colour(s) Available. |
Application Method: |
Brush, Roller, Airless Sprayer, H.V.L.P Sprayer, and Pump Sprayer. |
Cleaner / Thinner: |
White Spirits and Xylene. |
Shelf Life: |
24 Months if kept sealed and away from frost. |
Sizes Available: |
Available in 1 Litre 5 Litre 20 Litre 200 Litre 1000 Litre Variants. |
DATA SHEETS AND PRODUCT FILES
Below are the all the products and files we have on this coating, if you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call us on 01909 495708 and one of our staff members will do their best to try and provide you with the information needed.
Files and Data Sheets
COVERAGE CALCULATOR
This is our coverage calculator, enter the size (m2) of the area you are looking to cover, then enter the amount
of coats you are going to apply and it will inform you of the estimated quantity you will need based off of the
products average coverage rates.
If you require anymore information on this product, please email us at
sales@premiumpaints.co.uk or call us on
01909 495708 and one of our staff members will be more than happy to provide you
with the information needed.
Coverage Calculator
Select Variant and Order
£104.13 (ex VAT)
Express Delivery Available!
Everest Trade - Concrete Sealer - Polyurethane (PU) Resin Based - Internal and External - 20 Litre / Clear is backordered and will ship as soon as it is back in stock.
*subject to stock levels at the time of your order.
