Product Key Features:
Delivers a satin, wet-look finish to concrete floors, enhancing appearance and durability.
Suitable for both indoor and outdoor use, providing a versatile sealing solution.
The solvent-borne PU resin formula offers exceptional protection against traffic, stains, and weather.
Outperforms standard sealers with greater resistance to wear and abrasion.
Everest Trade - Concrete Sealer - Polyurethane (PU) Resin Based - Internal and External
HIGH PERFORMANCE POLYURETHANE CONCRETE SEALER
BENEFITS AND KEY FEATURES
- Manufactured with a premium polyurethane resin, resulting in a more durable sealer than other solvent-based sealers using acrylic resins
- Gives concrete superb long-term protection
- Provides a tough and durable high-performance seal coating
- Will not blister or peel, hardens & seals concrete permanently
- Reduces efflorescence from concrete
- Resists oil and stain penetration
- Easy to apply with a roller or sprayer
- Long-lasting and made with premium polyurethane resins
TO SEE THE COMPATIBLE OR RECOMMENDED PRODUCTS, SCROLL TO THE BOTTOM OF THE PAGE FOR RECOMMENDATIONS.
PRODUCT DESCRIPTION
Everest Trade Paints Concrete Sealer is a solvent-borne, polyurethane resin-based sealer with exceptional effectiveness, This sealer will provide a heavy-duty, long-lasting clear seal coating with a satin / wet look finish.
This product can be used internally (good ventilation required) and externally on domestic and industrial surfaces due to it's heavy-duty polyurethane resin base.
Its penetration comes about by solvent evaporation, Penetrating into the concrete to protect the surface from oil and water infiltration while also dustproofing the surface.
100% UVA resistant, resistant to tyre plucks and provides high resistance to oil stains, foot and vehicle traffic and water damage.
Maintains the performance life of the concrete. Yields significant whole life cost savings and reduces interim maintenance.
Made in England with Premium PU Resins.
More durable than other "solvent-based" sealers that use an inferior acrylic resin.
USES AND SURFACE COMPATIBILITY
Suitable for use on exterior concrete floors and driveways.
SPECIAL PROPERTIES
It is easily cleaned and will withstand regular washing. Also resistant to most oils.
SPREADING RATE
- First coat: Approximately 4 square meters per litre.
- Second coat: Approximately 6 square meters per litre.
This is a rough estimate and varies depending on the condition of the driveway and amount applied with each coat.
DRYING TIME
Under normal conditions, it is touch dry in approximately 4 hours.
Do not drive on the surface for 24 hours after the last coat.
APPLICATION
Apply by brush, roller, conventional H.V.L.P or airless spray.
We have compatible application tools here.
We recommend you apply 2 coats of this sealer for the best performance and finish.
STORAGE PRECAUTIONS
Store away from heat and flames. Secure the lid between uses to prevent paint hardening. Store away from frost.
THINNERS
Thinners aren't required with this product, use white spirits or a proprietary brush clear for cleaning.
SURFACE PREPARATION
Ensure all surfaces to be sealed are clean, 100% dry and free from oil and grease and there are a couple of days of good weather so there is no chance of rain during application.
Disclaimer: There is a small possibility that your order may be delivered in white tins with the product label applied, this is rare but can occur in times of increased demand due to the manufacturer running out of printed tins due to a large spike in sales. You can confirm this with the manufacturer.
Safety Disclaimer: This oil-based paint contains solvents and should be used in a well-ventilated area. Avoid inhalation of vapours and prolonged skin contact. Keep away from heat, sparks, and open flames. Always wear appropriate protective equipment, including gloves and a mask if required. Dispose of any waste in accordance with local regulations. Keep out of reach of children. For full safety information, refer to the product’s Safety Data Sheet (SDS).
PRODUCT TECHNICAL SPECIFICATIONS
Below are the technical specification of this coating, if you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call us on 01909 495708 and one of our staff members will be more than happy to provide you with the information needed.
Components: |
1 Part - Single Pack. |
Base Type: |
Polyurethane Resin. |
Finish: |
Semi-gloss, Eggshell Finish. |
Theoretical Coverage: |
Approximately 4 - 6 square metres per litre, per coat. |
Number of Coats: |
2 Coats Recommended. |
Coating Thickness: |
50 Microns. |
Suitable Substrates: |
Concrete, Concrete Floors, Concrete Flags/Slabs, and Most porous surfaces. |
Use Case (Interior / Exterior): |
Internal and External. |
Touch Dry Time: |
2 - 4 Hours at 18°C |
Overcoatable: |
2 - 4 Hours at 18°C. |
Pot Life: |
Not applicable. |
Primer Required?: |
No primer required. |
Colour Variation Count: |
1 Colour(s) Available. |
Application Method: |
Brush, Roller, Airless Sprayer, H.V.L.P Sprayer, and Pump Sprayer. |
Cleaner / Thinner: |
White Spirits and Xylene. |
Shelf Life: |
24 Months if kept sealed and away from frost. |
Sizes Available: |
Available in 1 Litre 5 Litre 20 Litre 200 Litre 1000 Litre Variants. |
DATA SHEETS AND PRODUCT FILES
Below are the all the products and files we have on this coating, if you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call us on 01909 495708 and one of our staff members will do their best to try and provide you with the information needed.
Files and Data Sheets
COVERAGE CALCULATOR
This is our coverage calculator, enter the size (m2) of the area you are looking to cover, then enter the amount
of coats you are going to apply and it will inform you of the estimated quantity you will need based off of the
products average coverage rates.
If you require anymore information on this product, please email us at
sales@premiumpaints.co.uk or call us on
01909 495708 and one of our staff members will be more than happy to provide you
with the information needed.
Coverage Calculator
Select Variant and Order
£41.63 (ex VAT)
Express Delivery Available!
Everest Trade - Concrete Sealer - Polyurethane (PU) Resin Based - Internal and External - 5 Litre / Clear is backordered and will ship as soon as it is back in stock.
*subject to stock levels at the time of your order.
excellent
Used the product on concrete drive damaged by salt/grit used during snow period. The drive was damaged and erocing at various places. Used the Everest Trade - Concrete Sealer and it appears to have stopped further erosion. The damaged area still needs to be repaired by applying new concrete, even in patches if not resurfacing the whole drive.
Absolutely over the moon with how it has covered. Only put one coat on and have enough left to cover the whole area again next year excellent service thank you so much.
Covered easily and worked well
After FedEx damaged and wouldn't deliver or even update me or premium paints my phone call to premium paints put my mind at ease. They replaced and delivered it all in two days.The concrete sealant was easy to use. It did a good job on resealing my resin drive and my imprinted concrete back patio and path. A good product and good customer service.
No problems went on a treat
I’ve only just used the concrete coating. It applied to the ground easily. I’ve done two coats and time will tell, how good it actually is. It’s too early to comment on the performance.
Needing to seal my aging concrete slab paving, I searched for a quality product and quickly found Everest Polyurethane Resin Sealer. I applied it with a roller and although some areas needed three coats, I was very pleased with the results. I wasn’t looking for a low priced product and after reading the reviews decided this was the right purchase. It is easy to apply and dries fairly quickly leaving a satin finish. I wish I had found this product sooner!! I recommend this unreservedly.
Not yet used this product waiting for some decent weather
Great product and service, technical advise over the phone is exactly what I needed
Everest Trade - Concrete Sealer - Polyurethane (PU) Resin Based - Internal and External
The tin container that the product was shipped in was really battered, looked as if it had been dropped. Hasn’t leaked though, delivery was quick.
Slightly runnier than I imagined. Two coats applied and two days of dry weather followed. Leaves a nice finish. Only concern is that after rain came, there are some opaque patches. Hopefully it is not letting any water through but only time will tell.
Great product,concrete patio looks brand new
Very good protection against stains.
Yet to use it as temp still below 10C on days I was free to apply it. Garage still needs to be emptied as well (house move)
Unable to review the sealer as the job is on hold. Will review when done.
Perfect product did the job 100% highly recommended it
60sqm of concrete patio, cleaved with diamond grinder and applied with a brush to a great wet look finish having used nearly all of the 40lts. 1st coat 1l per 4m, 2nd coat 1l per 5m and so on. Unfortunately where we are it hasn't rained since application but with the uniform finish I believe it will have done and good job to the extent that i am going to order another 20l for a second area I have to do.
Having used a more costly product in the past I thought I would try this sealant which was cheaper by far The result was just as good and it covered a greater area Very pleased with the result and would recommend it
Great product especially when following instructions. I had a concrete base 23x12 sand cement top screen which was dustier than should have been.
Used a water sprayer to apply to coats, sceptical though hope full. The last two 2.5 litre’s thought was a good idea to pour neat over area that was breaking down most 3 x foot square areas.
When dried heavy foot traffic took no toll over all areas sprayed 2 Coates,, unfortunately the area dumped the 2.5 litres neat over broke down heavey to an inch deep but sealed nicely any rain water just pooled. Finished off with self level cement and sprayed an all good.
Trust the product, follow the instructions & will do the job stated.
I chose the PP sealant for my large, imprinted concrete driveway primarily for the stated greater durability of this PU-based sealant over acrylic-based alternatives. Clearly, only time and cars across the drive will tell whether this is proven. I applied the first coat yesterday, thankfully with fine weather all day as it took a long time for the sealant in the deeply imprinted pattern to evaporate fully. I was impressed with how quickly the sealant could be applied and the relatively low odour of the solvent. I wore a PP2 mask, but on reflection, it wasn’t really necessary. This morning my driveway looks excellent, and as good as new. The finish is quite glossy and feels really hard. I hope it isn’t slippery when wet or in the winter. Today I intend applying the second coat. I have used a lot less of the sealant than I had anticipated, but this is probably down to the drive had been sealed before. The bonus is that I will now have enough sealant to seal my patio at the back of the house.
Excellent product but beware, you may need more than you think. 10 litres should have been enough to provide two coats on my garage floor (25 sq mtrs), but I ordered 20 as it was much cheaper on a per litre basis. Good job I did, the garage floor needed 5 coats before it was fully sealed, not an issue with the product, just an extremely porous concrete floor, I used all 20 litres !
done what it said on the tin no fuss and easy to apply
Used on coloured concrete paths, covered really well, would recommend this.
So easy to apply and creates a great finish. Our drive looks like new and for such a reasonable price
Delighted with the product. After cleaning the drive we used the sealer, applying two coats. It was easy to spread, dried well without any bubbles of varnish which has been a problem faced in the past and has given an excellent finish to the drive.
