Product Key Features:
An environmentally-friendly sealer that doesn't compromise on quality and endurance.
Imparts a satin finish that beautifully showcases the texture and color of block paving.
Forms a solid defense against oil and water infiltration, protecting the structural integrity.
Excellently adheres to block paving, brickwork, and concrete, offering wide-ranging use.
Everest Trade - Eco Friendly and Solvent Free Block Paving Sealer - Satin Finish
BLOCK PAVING SEALER - ECO-FRIENDLY AND SOLVENT FREE
BENEFITS AND KEY FEATURES
- Eco-friendly and solvent-free formula
- 100% UV light resistant
- Prevents moss spores
- Stops staining on block paving
- Provides a premium satin finish
- Manufactured with premium hard wearing acrylic resins
TO SEE THE COMPATIBLE OR RECOMMENDED PRODUCTS, SCROLL TO THE BOTTOM OF THE PAGE FOR RECOMMENDATIONS.
PRODUCT DESCRIPTION
Everest Trade Eco-Friendly & solvent-free block paving sealer is an eco-friendly block paving sealer based on premium acrylic resins. This sealer will provide a clear Satin finish seal coating to protect your driveway from fading, moss, lichen and weed formation. Its penetration comes about by evaporation, Penetrating into the blocks and sand binds the particles of sand and protects the paver face from oil and water infiltration. The sealer prevents moss and weed formation when applied correctly, joints should be re-sanded for optimum results.
100% UVA resistant, great resistance to tyre plucks and resists oil stains and water damage.
Maintains the performance life of the pavement. Yields significant whole-life cost savings and reduces interim maintenance.
USES AND SURFACE COMPATIBILITY
Suitable for use on block paving, brickwork and concrete.
COMPATIBLE PRODUCTS
Driveway Cleaner - Everest Trade Ultimate Driveway Cleaner
Oil Stain Remover - Everest Trade Oil Stain Remover
Efflorescence Remover - Everest Trade Efflorescence and Salts remover
SPECIAL PROPERTIES
It is easily cleaned and will withstand regular washing. Also resistant to most oils.
SPREADING RATE
- First coat: Approximately 5 square meters per litre.
- Second coat: Approximately 6 square meters per litre.
This is a rough estimate and varies depending on the condition of the driveway and the amount applied with each coat.
DRYING TIME
Under normal conditions, it is touch dry in approximately 3 hours.
Do not drive on the surface for 24 hours after the last coat.
APPLICATION
Brush, Roller, or Sprayer.
Sprayers will provide the best results due to the being less chance of interfering with the sanded joints.
Apply two coats thin coats at 5-6 square meters per litre to achieve the best results. Applying the coats in thin fully rolled-out coats will prevent any issues and speed up drying times.
To achieve a more enhanced finish on the blocks you can apply a third coat.
Rollers and brushes are fine for application, be careful when going over joints for best results.
The sealer needs to be applied to a bone-dry surface to ensure no issues with surface whiteness. The sealer needs to applied in thin even coats to ensure maximum durability and no issues with the coating.
We have compatible application tools on our website.
Make sure the surface is 100% dry and free from any moisture or contaminants before application. Do not apply if there is any chance of rain. We advise ensuring there is no chance of moisture during the drying process, which can be a couple of days after application for best results.
STORAGE PRECAUTIONS
Store away from heat and flames. Secure the lid between uses to prevent paint hardening. Store away from frost.
THINNERS
Thinners aren't required with this product, use white spirits or a proprietary brush clear for cleaning.
SURFACE PREPARATION
Ensure all surfaces to be sealed are clean, dry and free from oil and grease and there are a couple of days of good weather so there is no chance of rain during application.
Disclaimer: There is a small possibility that your order may be delivered in white tins with the product label applied, this is rare but can occur in times of increased demand due to the manufacturer running out of printed tins due to a large spike in sales. You can confirm this with the manufacturer.
PRODUCT TECHNICAL SPECIFICATIONS
Below are the technical specification of this coating, if you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call us on 01909 495708 and one of our staff members will be more than happy to provide you with the information needed.
Components: |
1 Part - Single Pack. |
Base Type: |
Premium Acrylic Resin. |
Finish: |
Satin Finish. |
Theoretical Coverage: |
Approximately 5 - 6 square metres per litre, per coat. |
Number of Coats: |
2 Coats Recommended. |
Coating Thickness: |
50 Microns. |
Suitable Substrates: |
Standard Block Paving, Concrete Block Paving, Concrete Flags/Slabs, and Concrete. |
Use Case (Interior / Exterior): |
Internal and External. |
Touch Dry Time: |
3 Hours at 18°C |
Overcoatable: |
2 - 4 Hours at 18°C. |
Fully Cured: |
Not applicable. |
Pot Life: |
Not applicable. |
Primer Required?: |
No primer required. |
Colour Variation Count: |
1 Colour(s) Available. |
Application Method: |
Brush, Roller, H.V.L.P Sprayer, Airless Sprayer, and Pump Sprayer. |
Cleaner / Thinner: |
Clean with soapy water. |
Shelf Life: |
24 Months if kept sealed and away from frost. |
Sizes Available: |
Available in 1 Litre 5 Litre 20 Litre 200 Litre 1000 Litre Variants. |
DATA SHEETS AND PRODUCT FILES
Below are the all the products and files we have on this coating, if you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call us on 01909 495708 and one of our staff members will do their best to try and provide you with the information needed.
Files and Data Sheets
COVERAGE CALCULATOR
This is our coverage calculator, enter the size (m2) of the area you are looking to cover, then enter the amount of coats you are going to apply
and it will inform you of the estimated quantity you will need based off of the products average coverage rates.
If you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call
us on 01909 495708 and one of our staff members will be more than happy to provide you with the information needed.
Coverage Calculator
Select Variant and Order
Including VAT
Inc VAT
Express Delivery Available!
Everest Trade - Eco Friendly and Solvent Free Block Paving Sealer - Satin Finish - 20 Litre is backordered and will ship as soon as it is back in stock.
*subject to stock levels at the time of your order.
Customer Reviews
Ask me in a years time weeds or no weeds 😂
Great product
Good website and service
Everest Trade - Eco Friendly and Solvent Free Block Paving Sealer - Satin Finish
Everest Trade - Eco Friendly and Solvent Free Block Paving Sealer - Satin Finish
Everest Trade - Eco Friendly and Solvent Free Block Paving Sealer - Satin Finish
Everest Trade - Eco Friendly and Solvent Free Block Paving Sealer - Satin Finish
Great item this is the third tube and will use again when I need to
Great item this is the third tube and will use again when I need to
Good product
