Everest Trade - High Build Polyurethane (PU) Resin Based Garage Floor Paint - Anti-Slip

KEY FEATURES AND BENEFITS

• High-quality polyurethane resin based floor paint.
• Ideal for use in home garages, commercial garages, showrooms and service centers.
• Available In a wide range of colours.
• Anti-Slip textured gloss finish (with anti-slip option).
• Gloss finish (without anti-slip option).
• High build formula.
• Heavy duty and long lasting.
• High durability and is easy to clean.

 If you're looking for a product for exterior use CLICK HERE to view the relevant item.

PRODUCT DESCRIPTION
A single pack hard wearing, highly durable polyurethane resin based floor paint with the option of added silica particles for effective anti-slip properties.

High durability against abrasion and impacts.

Made in England with premium resins.

Provides a coating with medium-high foot and vehicle traffic wear resistance.

Designed to protect, seal and colour concrete, wood and stone internal garage floors. It provides a tough petrol and oil resistant finish with excellent durability. Also ideal for use in garages and on workshop floors.

 
SURFACE PREPARATION
Ensure all surfaces are sound and clean, free from dust and flaking paint. 
Ensure surface is completely dry and free from condensation and damp.
Remove any loose or flaking paint.

If bare concrete is being painted it is advised a base coat of "Everest Trade polyurethane floor primer and sealer" is used to get the best results as the primer will provide a penetrating base coat for the top coat to anchor to.

COLOURS AVAILABLE
Red, Blue, Black, White, Dark Grey, Grey, Light Grey, JCB Yellow and Green.

As well as any British standard or RAL colour for orders of 100 litres and over.

Click here for a colour chart.

 
SPREADING RATE (Coverage)
Approximately 5 - 7 square metres per litre.
 
DRYING TIME
Under normal circumstances, it should be touch dry in 6 hours if well ventilated and conditions are dry.
 
APPLICATION
Brush, Roller, or Spray.

Mix thoroughly before use with a paddle mixer drill attachment.

Two coats should be applied thinly and evenly to provide maximum hardness when dry and to minimise drying times.

Make sure the surface is 100% dry and free from any moisture or contaminants before application.

 
STORAGE PRECAUTIONS
Store away from heat and naked flames. Secure lid between uses to prevent paint hardening.
 
THINNERS
White Spirit or Turpentine Substitute can be used for thinning.

BATCH INFORMATION IMPORTANT!
We recommend ordering all the paint required in one order so you receive the same batch, Ordering on different dates will result in receiving different batches which may result in a shade difference.
This is fine if you are planning on using the different batches on different coats, However, it's not recommended to use on the same coat.