BENEFITS & KEY FEATURES

• Approximately touch dry In 4 - 6 hours.
• Highly effective concrete dustproofer.
• Reduces the risk of delamination.
• Great coverage (6-10 square meters per litre).
• Provides a great base coat for floor paints on bare concrete.
• Heavy duty and long-lasting.
• High durability and is easy to clean.
• For use with Everest Trade polyurethane floor paints.

PRODUCT DESCRIPTION
A clear, single pack, low viscosity penetrating concrete dustproofer that is designed to soak into the substrate, sealing the surface and preventing dust formation while also being perfect for use as a sealer/ primer coat to be used prior to the application of Everest Floor PU Paints providing excellent adhesion of subsequent topcoats.

This product will reduce any risk of delamination due to poor penetration of heavy topcoats.

Suitable for use on its own as a highly effective dustproofer and heavy-duty concrete sealer or as with "Everest Trade Polyurethane (PU) Floor Paints"  to prime the surface for painting, Can be used on bare or painted concrete. Not to be used with waterbased acrylic or alkyd floor paint.
 
SPREADING RATE (Coverage)
Approximately 6-10 square metres per litre, per coat.

This varies depending on the condition and porosity of the concrete.

 
DRYING TIME
Under normal circumstances, it should be touch dry in 4 - 6 hours if well ventilated and conditions are dry.

Allow at least 8 hours after the last coat for the Everest Trade Paints Floor Primer and Sealer Paint to fully absorb into the concrete and dry.

 
APPLICATION
This product can be applied with a Brush, Roller, or Sprayer.
Make sure the surface is 100% dry and free from any moisture or contaminants before application.

IF YOU'RE USING THIS PRODUCT AS A FLOOR PRIMER/SEALER PRIOR TO APPLICATION OF POLYURETHANE FLOOR PAINT:

Apply 1 coat to bare concrete areas. Apply the coat thin (roll coat out) and evenly, trying to avoid any pooling or over application. 

IF YOU'RE USING THIS PRODUCT AS A STANDALONE CONCRETE SEALER:

Apply 2 coats. Apply coats (50 microns per coat) thin (roll coats out) and evenly, trying to avoid any pooling or over application. A 3rd coat can be added if a dark, higher sheen finish is required.

STORAGE PRECAUTIONS
Store away from heat and naked flames. Secure lid between uses to prevent paint hardening.
 
THINNERS
White spirit or turpentine substitute can be used for thinning.
 
SURFACE PREPARATION
Ensure all surfaces are sound and clean, free from algae and moss. 
Ensure surface is completely dry and free from condensation and damp.
Remove any loose or flaking paint.

SURFACE PREPARATION
Ensure all surfaces are sound and clean, free from dust and flaking paint. 
Ensure surface is completely dry and free from condensation and damp.
Remove any loose or flaking paint.

Power floated and self levelled floors need to be etched before application of any floor paint, this can be done with an acid etching solution or using a floor grinding machine.

APPLICATION
Apply by brush, roller, conventional H.V.L.P or airless spray.

Mix thoroughly before use with a paddle mixer drill attachment.

IF YOU'RE USING THIS PRODUCT AS A FLOOR PRIMER/SEALER PRIOR TO APPLICATION OF POLYURETHANE FLOOR PAINT:

Apply 1 coat to bare concrete areas. Apply the coat thin (roll coat out) and evenly, trying to avoid any pooling or over application.

IF YOU'RE USING THIS PRODUCT AS A STANDALONE CONCRETE SEALER:

Apply 2 coats. Apply coats (50 microns per coat) thin (roll coats out) and evenly, trying to avoid any pooling or over application. A 3rd coat can be added if a dark, higher sheen finish is required.

PRODUCT TECHNICAL SPECIFICATIONS

Below are the technical specification of this coating, if you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call us on 01909 495708 and one of our staff members will be more than happy to provide you with the information needed.

DATA SHEETS AND PRODUCT FILES

Below are the all the products and files we have on this coating, if you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call us on 01909 495708 and one of our staff members will do their best to try and provide you with the information needed.

Files and Data Sheets

MSDS - Material Safety Data Sheet

PAG - Product Application Guide

COVERAGE CALCULATOR

This is our coverage calculator, enter the size (m2) of the area you are looking to cover, then enter the amount of coats you are going to apply and it will inform you of the estimated quantity you will need based off of the products average coverage rates.

If you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call us on 01909 495708 and one of our staff members will be more than happy to provide you with the information needed.