Paintmaster - Block Paving Sealer - Polyurethane Resin Based - (Highly Durable)
Block Paving Sealer - Polyurethane Resin Based
BENEFITS:
- 100% UVA and Fade resistant.
- Excellent resistance to rain spotting and tyre plucks.
- Resists oil stains and water damage.
- Prevents moss spores.
- Especially suitable where a high gloss finish is not required.
- Early use on new, dry, block paving helps prevent efflorescence [white powdery staining].
- Stops staining and sand joints in block paving.
DESCRIPTION
Paintmaster Block paving sealer is an air-drying, solvent-borne, Polyurethane resin-based sealer which provides a durable sealer coat with a semi-gloss eggshell finish.
USES
Suitable for use on concrete block paving, brickwork and concrete. Not suitable for clay pavers.
SPECIAL PROPERTIES
It is easily cleaned and will withstand regular washing. Also resistant to most oils.
SPREADING RATE AND COATS REQUIRED
We recommend applying 2 coats for the best results and optimum performance.
1st coat coverage, approximately 4 square metres per Litre, depending on surface porosity and texture.
2nd coat coverage, approximately 6 square metres per Litre, depending on surface porosity and texture
DRYING TIME
Under normal conditions, it is touch dry in approximately 3 - 4 hours.
APPLICATION
Brush, Roller, or Airless Spray.
Make sure the surface is 100% dry and free from any moisture or contaminants before application. Do not apply if there is any chance of rain.
STORAGE PRECAUTIONS
Store away from heat and flames. Secure the lid between uses to prevent paint hardening.
THINNERS
White Spirit or Turpentine Substitute can be used for thinning.
SURFACE PREPARATION
Ensure all surfaces to be sealed are clean, dry and free from oil and grease and there are a couple days of good weather so there is no chance of rain during application.
Disclaimer: There is a small possibility that your order may be delivered in white tins with the product label applied, this is rare but can occur in times of increased demand due to the manufacturer running out of printed tins due to a large spike in sales. You can confirm this with the manufacturer.
PRODUCT TECHNICAL SPECIFICATIONS
Below are the technical specification of this coating, if you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call us on 01909 495708 and one of our staff members will be more than happy to provide you with the information needed.
Components: |
1 Part - Single Pack. |
Base Type: |
Polyurethane Resin. |
Finish: |
Satin / Wetlook Finish Finish. |
Theoretical Coverage: |
Approximately 6 - 8 square metres per litre, per coat. |
Number of Coats: |
2 Coats Recommended. |
Coating Thickness: |
50 Microns. |
Suitable Substrates: |
Concrete Block Paving, Standard Block Paving, Concrete, and Brick. |
Use Case (Interior / Exterior): |
Internal and External. |
Touch Dry Time: |
3 - 4 Hours at 18°C |
Overcoatable: |
4 - 6 Hours at 18°C. |
Pot Life: |
Not applicable. |
Primer Required?: |
Not Applicable. |
Colour Variation Count: |
1 Colour(s) Available. |
Application Method: |
Brush, Roller, Airless Sprayer, H.V.L.P Sprayer, and Pump Sprayer. |
Cleaner / Thinner: |
White Spirits and Standard Thinners. |
Shelf Life: |
24 Months if kept sealed and away from frost. |
Sizes Available: |
Available in 1 Litre 2.5 Litre 5 Litre 20 Litre 200 Litre Variants. |
DATA SHEETS AND PRODUCT FILES
Below are the all the products and files we have on this coating, if you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call us on 01909 495708 and one of our staff members will do their best to try and provide you with the information needed.
Files and Data Sheets
COVERAGE CALCULATOR
This is our coverage calculator, enter the size (m2) of the area you are looking to cover, then enter the amount of coats you are going to apply
and it will inform you of the estimated quantity you will need based off of the products average coverage rates.
If you require anymore information on this product, please email us at sales@premiumpaints.co.uk or call
us on 01909 495708 and one of our staff members will be more than happy to provide you with the information needed.
Coverage Calculator
Select Variant and Order
Including VAT
Inc VAT
Express Delivery Available!
Paintmaster - Block Paving Sealer - Polyurethane Resin Based - (Highly Durable) - 20 Litre / Clear is backordered and will ship as soon as it is back in stock.
*subject to stock levels at the time of your order.