RATED EXCELLENT BY OUR CUSTOMERS ★★★★★

New paints just added! View New Products

Trade accounts now available Apply Now

Need Help? Email Us: sales@premiumpaints.co.uk

FLOOR PREPARATION

Easy to Use

Ready in 4 simple steps

1

Step 1 - Gear Up

Wear nitrile gloves, goggles with a face shield, and overalls.

2

Step 2 - Sweep

Clear loose debris and block off nearby drains.

3

Step 3 - Scrub

Dilute with water, then broom it in one section at a time.

4

Step 4 - Rinse

Hose off, collect the water, and let the floor dry.

EverFlor - Concrete Degreaser - Oil & Grease Remover

EverFlor - Concrete Degreaser - Oil & Grease Remover

Manufactured by EverFlor

Performance & Key Features

Oil-Free Concrete, Ready for Primer

Oil and Grease Specialist

Lifts contamination out of the slab before coating

Two Strengths

One concentrate for routine grime and ingrained oil

Broom and Hose

One application, brushed in and rinsed off

Professional and Industrial

Garages, workshops and warehouses, indoors or out

At a Glance

Coverage

Coverage

20m² of bare concrete per 5 litres

Pack Size

Pack Size

5 litres

Dilution

Dilution

50:1 General, 20:1 Heavy

Temperature

Temperature

Use and store at 5°C to 30°C

Surfaces

Surfaces

Concrete and asphalt, indoors or out

Hazard

Hazard

Corrosive, so wear gloves and goggles

CoverageCoverage
Pack SizePack Size
DilutionDilution
TemperatureTemperature
SurfacesSurfaces
HazardHazard

In stock — Free UK delivery Free UK delivery

Pay in 3 with Klarna.

Interest free

Select Variant and Order


£30.95 (inc VAT) £34.43

£25.79 (ex VAT)

Express Delivery Available!


SKU: EFL-CLND-5-C

Size
Now with Free delivery to UK mainland customers.

*subject to stock levels at the time of your order.

Performance & Key Features

Oil-Free Concrete, Ready for Primer

Oil and Grease Specialist

Lifts contamination out of the slab before coating

Two Strengths

One concentrate for routine grime and ingrained oil

Broom and Hose

One application, brushed in and rinsed off

Professional and Industrial

Garages, workshops and warehouses, indoors or out

At a Glance

Coverage

Coverage

20m² of bare concrete per 5 litres

Pack Size

Pack Size

5 litres

Dilution

Dilution

50:1 General, 20:1 Heavy

Temperature

Temperature

Use and store at 5°C to 30°C

Surfaces

Surfaces

Concrete and asphalt, indoors or out

Hazard

Hazard

Corrosive, so wear gloves and goggles

CoverageCoverage
Pack SizePack Size
DilutionDilution
TemperatureTemperature
SurfacesSurfaces
HazardHazard

In stock — Free UK delivery Free UK delivery

Pay in 3 with Klarna.

Interest free
EverFlor floor preparation

Oil and Grease Removal, From the EverFlor Range

Made by Everest Paints in Nottinghamshire, this is the EverFlor product for oily, greasy concrete. Use it before the primer and floor paint go down, or to clean contaminated floors in service. Everyday dirt and smooth bare concrete each have their own EverFlor product.
Oil-stained workshop slab
Clean concrete, ready to prime

Performance Profile

Takes oil and grease out of concrete before it's coated. A clear, water-based concentrate for hard floors, inside or out. Diluted to suit the contamination, brushed in and rinsed away, it leaves a clean slab ready for primer and floor paint.

Read More
Coverage 40m²per litre at the 20:1 mix
Coats 1second pass on heavy oil
Colour Clearno tint left on the slab
Usage Inside & Outconcrete and hard floors
Technical Highlights

Click an icon to explore features

EverFlor - Concrete Degreaser - Oil & Grease Remover

Two-Rate Dilution

One concentrate covers two jobs. Mix it weaker for general grime and stronger where oil has soaked in.

Lifts, Not Spreads

Brushed into the surface, it loosens oil so rinsing carries it off the floor. It doesn't just push the grease around.

Clear and Water Based

The liquid is clear, so it leaves no colour on the slab. Clean water is all you need to rinse it away.

Handle With Care

The concentrate can seriously damage eyes. Wear the protective kit and keep rinse water out of drains.

Essential Information

Product Details

BENEFITS AND KEY FEATURES

  • Lifts oil and grease out of concrete, not around it
  • Leaves a clean slab for primer to bond to
  • One concentrate, diluted for light or heavy contamination
  • Clear liquid that leaves no colour on the floor
  • Rinses away with clean water before you prime
  • Works with ordinary site kit: broom, brush or scrubber
  • For professional and industrial use, indoors and outdoors

Why You Need to Degrease a Concrete Floor Before Painting

Floor paint stays down when it bonds to the concrete itself, so a concrete floor degreaser lifts out the oil and grease before you paint. Years of drips and spills soak into the pores of a garage or workshop floor. Paint laid over them grips the oil instead of the concrete, then peels once the floor is back in use. EverFlor Concrete Degreaser is a clear, water-based degreaser concentrate that deep-cleans those pores, so the oil scrubs loose and rinses out. It also cleans oily floors that are not being painted, and floors due for repair.

How to Use It

Dilute it with water: 50:1 for general grime, or a stronger 20:1 for ingrained oil. A litre of concentrate mixed at 20:1 covers about 40m². Scrub it in with a stiff broom, rinse with clean water and collect the dirty water. Let the floor dry fully before you prime. You'll find the full step-by-step method, including the protective kit to wear, in the Application tab.

Removing Oil From Concrete You Aren't Painting

You can use this concrete floor degreaser on concrete you simply want clean, too. The same mix works as a garage floor degreaser, and as an oil stain remover for concrete in a working workshop. Heavy stains may need a second pass. It also cleans down areas before repair work, so the repair goes onto clean concrete.

Use It With

Once the floor is degreased and dry, prime it with Deep Penetrating Epoxy Primer / Sealer or Polyurethane Dustproofer / Floor Primer & Sealer.

Is This the Right Degreaser for Your Floor?

Keep this product off concrete younger than 21 days, or holding 6% moisture or more. It also doesn't replace mechanical preparation where your coating's specification asks for it. Our guide on how to prep concrete for paint sets out the full sequence. For advice on your floor, our specialist team can help before and after you buy: use live chat or call 01909 495708.

Our concrete floor degreaser is the deep clean for oil and grease. Each EverFlor preparation product has its own job, so you'll want the one that matches your floor.

What is on your floor Use
Oil and grease, fresh or ingrained EverFlor Concrete Degreaser (This Product)
Everyday dirt and light grime only EverFlor Floor Cleaner
Nothing, but it's too smooth for paint to grip EverFlor Etch & Clean


Key Facts

Spec Detail
Type Clear, water-based degreaser concentrate
Removes Oil, grease and general soiling
Dilution 50:1 with water for general grime; 20:1 for ingrained oil
Coverage About 40m² per litre of concentrate at 20:1
Applications One, plus a second pass on heavy contamination
Where Concrete and hard floors, indoors and outdoors
Working temperature 5°C to 30°C, never in freezing conditions
Not for Concrete under 21 days old, or with 6% moisture or more
Pack size 5 litres
Shelf life 12 months unopened


Tin packaging: in rare cases during periods of high demand, orders may arrive in white tins with the product label applied. This is a supply chain measure taken by the manufacturer and does not affect the product.
Will it shift oil that has soaked in for years?
Ingrained oil needs the stronger mix, firm scrubbing and often a second pass. Check each area after you rinse it, and treat it again wherever it still feels greasy or looks stained before you prime.
Can I use it in an enclosed workshop?
Yes, as long as the space is well ventilated. It's water based, with a VOC content below 30 g/l and no solvent smell. Wear the full protective kit and avoid breathing any spray or mist while you work.
What should I do with the dirty rinse water?
Collect it and keep it out of drains, sewers and watercourses, because it carries oil, grease and degreaser. Dispose of it through a licensed waste contractor. Let any residue in an empty container dry out, then recycle the container where a local route exists.
Is it suitable for freshly laid concrete?
No, not until the slab is at least 21 days old and its moisture content is below 6%. It isn't made for new or wet concrete.
Does it work on outside concrete as well as inside?
Yes, it is made for hard floors both indoors and out. Work outside only when your slab and the air sit within 5°C to 30°C, and never in freezing conditions.