Bond It - SealAcryl - One Coat Emergency Repair & Waterproofer - Grey, White & Black
In Stock! 24 Hour or 48 Hour Delivery Available On All Items!
- Excellent adhesion
- Application in damp weather
- Instant protection
- Superb solar reflectivity
- Reinforced membrane
- One coat application
- Fully flexible
- Unaffected by temperature
A one component, UV stable, solvent-based, multi-purpose roof coating membrane. Designed to prevent the ingress of water whilst allowing any trapped moisture to escape and evaporate naturally. Manufactured with fibre reinforcement pre-dispersed in the can for ease of application.
For renovation of all types of roof structure. Provides waterproof protection of : flat and pitched roofs, corrugated asbestos, roof lights, flashings, roofing felt, gutters, slate, asphalt, lead, glasshouses, metal and fibregalss. Will also bridge small gaps and cracks. Treat all details first, in areas where excessive movement may occur additional reinforcement can be incorporated into the coating. Sealacryl can be applied in one coat, but experience has shown that a two coat application ensures a greater uniformity of coating thickness. Do not thin. Apply using either a brush or roller.
For renovation of all types of roof structure. Provides waterproof protection of: flat and pitched roofs, corrugated asbestos, roof lights, flashings, roofing felt, gutters, slate, asphalt, lead, glasshouses, metal and fibreglass. Will also bridge small gaps and cracks.
All surfaces must be structurally sound, clean, dry and free from surface contaminants such as grease, rust and dirt. Clean metals with a wire brush to remove contamination and to provide a key. If necessary, remove any organic growth i.e. moss or lichen, with a fungicidal wash. Make good all cracks, splits, small holes and flashings and ensure the area to be treated is free from standing water. SEALACRYL requires no primer on most surfaces and will tolerate damp surfaces although with any application for best results apply to a dry surface if possible. Carry out an adhesion test prior to application to determine if use of a primer is necessary.
Do not thin. Apply SEALACRYL using either a brush or roller. Treat all details first, in areas where excessive movement may occur additional reinforcement can be incorporated into the coating. SEALACRYL can be applied in one coat, but experience has shown that a two coat application ensures a greater uniformity of coating thickness.
Normally 24 hours dependant on ambient temperature and ventilation.
Average coverage is approximately 1-2kg per square metre. Thick coatings may take up to a week to dry. The product may remain slightly soft for a period of time after application. This will not affect its waterproofing properties.
SAFE HANDLING PRECAUTIONS
Please refer to separate material safety data sheet for full handling, use and storage instructions. Keep out of reach of children. It is the users' responsibility to determine suitability for use. If in doubt contact our Technical Department for advice.
DISPOSAL OF CONTAINERS
Do not leave containers on site where residue could be a hazard to children, animals or the environment. Replace lids securely and remove any containers to a central disposal point.
Not suitable for use on balconies and walkways.
Available in grey, white and black.
CLEANING OF TOOLS
Clean with paraffin (kerosene) or white spirit.
Store under cover away from sources of heat and ignition. Keep containers sealed when not in use.
The shelf life of this product is a minimum of 5 years under good storage conditions in original unopened containers.