Bond It - Bitubond Waterproof Flashing Tape - Self-Adhesive - 50mm - 300mm
Free Delivery on this item!
Express Delivery Available.
- A crease resistant lead coloured flashing tape for general repairs and sealing
- It has a heavy duty aluminium/polyester laminate facing with a high grade bitumen backing
- This gives the product tear resistance, thus aiding speed and ease of application
- Designed for use as flashing on flat and pitched roofs, on parapets and chimney stacks
- It is also ideal for sealing around RSJ's, flues, concrete columns, roof-lights, guttering and extractor vents
- The strength of facing gives resistance to puncturing and the bitumen gives flexibility and adhesion but without the problems of slump
A crease resistant lead coloured flashing tape for general repairs and sealing. It has a heavy duty aluminium/polyester laminate facing with a high grade bitumen backing. This gives the product tear resistance, thus aiding speed and ease of application.
Crease resistant, lead coloured, self-adhesive flashing tape for general repairs and sealing. Designed for use as flashing on flat and pitched roofs, on parapets and chimney stacks. It is also ideal for sealing around RSJ's, flues, concrete columns, roof-lights, guttering and extractor vents. The strength of facing gives resistance to puncturing and the bitumen gives flexibility and adhesion but without the problems of slump.
Bond It FLASHING TAPE is designed for use as flashing on flat and pitched roofs, on parapets and chimney stacks. It is also exceptional for sealing around RSJ’s, flues, concrete columns, rooflights, guttering and extractor vents. The strength of the facing gives resistance to puncturing and the bitumen gives flexibility and adhesion but without the problems of slump.
- Replacement & repair of flashings
- Repair & sealing of down pipes
- Sealing glazing & roof lights
- Sealing parapets
- Waterproofing of coping & roof ridges
- General roof repairs
On New Building: Bond It FLASHING TAPE can be used in the following application: as flashing on flat or pitched roofs of asbestos, concrete or aluminium, parapet flashing, sealing upstands through roofs. Sealing around RSJ’s, flues, concrete columns, rooflights and extractor vents. Sealing joints of pipes of different materials prior to casting in concrete. Vertical DPC for sealing cavity walls at door and window openings. Capping corrugated roof ridges prior to fixing ridge flashing. Protection of stool stanchions at contact with facing bricks. Damp-proof membrane to columns, protection of pipes and general insulation work.
On Repair Work: Repairing damaged lead flashing and lead roofing. Sealing mortar faults. Repair to damaged slates and tiles in awkward situations. Downpipe and joint repairs. Gutter and valley linings and joint repairs on asbestos, concrete or metal. Gutter closures to prevent storm overflow into buildings. Eaves closure. Drip tray into gutters. Glazing bars, rooflights and northlights. Cappings to asbestos roofing. Emergency repairs to windows. Sealing leaks in cars, trucks and vans, etc.
Bond It FLASHING TAPE comprises heavy-duty facing coated with a minimum 1.2mm thickness of pressure sensitive modified bitumen. The adhesive content is specially formulated for flexibility at low temperatures and resistance to flow at high temperatures and an immediate bond is obtained by applying firm hand pressure. The strength of the bond increases with time. The thickness of the self-adhesive bitumen ensures very close contact, even on comparatively rough surfaces, while the product’s durability provides long-lasting protection combined with an attractive appearance.
Bond It FLASHING TAPE is supplied in rolls for fast and clean application and conforms readily to awkward contours, providing excellent weather protection. It can be used for all flashing and roofing applications and general water sealing repairs on masonry, asbestos, timber, metal or glass. No special skills or tools are required.
All surfaces must be structurally smooth, clean, dry and dust-free. Any loose matter must be removed with a wire brush. Any moss or lichen should be removed using a fungicidal wash. Porous or rough surfaces should be primed with BITUMEN PRIMER and allowed to dry before applying FLASHING TAPE.
In very cold weather Bond It FLASHING TAPE should be stored indoors in warm (18°C+) conditions overnight before use.
- Cut a section of FLASHING TAPE to the required length, remove the release paper and press down the adhesive bitumen to the previously prepared surface.
- Ensure full contact by smoothing down with a cloth, taking care to eliminate air bubbles.
- Roll down the edges with a wall paper roller or trowel to make a good edge seal. take care to avoid damaging the FLASHING TAPE surface.
- Joined sections of FLASHING TAPE. should always be overlapped by a minimum of 25mm (one inch) and well rolled down.
Note: in cold weather adhesion will be improved by storing the roll in a warm room for 12 hours or more before use, or by gently warming the backing strip during application.
DO NOT UNDER ANY CIRCUMSTANCES APPLY IN CONDITIONS BELOW 5C.
Not suitable for polycarbonate or acrylic glazing e.g. conservatory roofs.
SAFE HANDLING PRECAUTIONS
Please refer to separate material safety data sheet for full handling, use and storage instructions. Keep out of reach of children. It is the users responsibility to determine suitability for use. If in doubt contact our Technical Department for advice.
Note: this information is for general guidance only, since site conditions and labour are beyond our control. It is recommended that users make their own tests to determine suitability.
Store in a cool dry place. In very cold weather the flashing may be softened by gentle application of air using a warm air gun.
DO NOT USE NAKED FLAMES.
Bond It FLASHING TAPE is available in 10m rolls and in widths of 50, 75, 100, 150, 225 and 300mm. It is also available in 3m rolls in widths of 100, 150 and 225mm.
WIDTH LENGTH CODE
50mm x 10m BDF001
75mm x 10m BDF002
100mm x 10m BDF003
150mm x 10m BDF004
225mm x 10m BDF005
300mm x 10m BDF006
100mm x 3m BDF009
150mm x 3m BDF010
225mm x 3m BDF011
We offer 48 hour delivery for all accessories for £4.95 per item, if purchased with any paint, sealer or coating the delivery is 48-hour delivery is free.
A 24-hour courier is available for £7.95 per item.
ESTIMATED DELIVERY TIME
Items purchased with 48-hour courier will be delivered will be delivered within
2-3 working days depending on the time of purchase.
Items purchased with 24-hour courier will be delivered will be delivered within 1-2 working days depending on the time of purchase.
SCOTTISH HIGHLANDS AND ISLES
Some addresses in the Scottish isles and highlands come with a surcharge, you can see from the diagram here if your postcode is included.
Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately, we can’t offer you a refund or exchange.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
To complete your return, we require a receipt or proof of purchase.
Please do not send your purchase back to the manufacturer.
There are certain situations where only partial refunds are granted (if applicable)
Any item not in its original condition is damaged or missing parts for reasons not due to our error
Any item that is returned more than 30 days after delivery.
REFUNDS (if applicable)
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.
Late or missing refunds (if applicable)
If you haven’t received a refund yet, first check your bank account again.
Then contact your credit card company, it may take some time before your refund is officially posted.
Next, contact your bank. There is often some processing time before a refund is posted. If you’ve done all of this and you still have not received your refund yet, please contact us at email@example.com.
Exchanges (if applicable)
We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at firstname.lastname@example.org and send your item to: Premium Paints Unit 4 TRANKER LANE Worksop GB S80 3LG.
For sales and technical advice, call us on the number below or email us via our contact form.
Here are our opening times and our contact details should you need them:
Monday - Friday 9am - 6pm
If you are unable to call us or prefer to email us please enter your message in the form below and we'll get back to you ASAP.
I like the product as it sprays well a d drys fairly quick, we tried it as one coat but we think we will ha e to put a under coat on.
Used this on my stone slabs looks great, my patio looks brand new.
I have not yet been able to use your product, I am however only willing to review when I have used it if you do not mention my name. You can us just 'Mike'