Everest Trade - High Build Industrial Grade Concrete Floor Paint - PU Resin Based- Anti-Slip

BENEFITS AND KEY FEATURES

• Industrial grade, polyurethane floor paint.
• Long lasting floor coating!
• Manufactured for use in factories, warehouses and industrial units.
• Long lasting and highly durable.
• Based on a high-quality, premium polyurethane resin.
• Available in a wide range of colours.
• Anti-slip textured gloss finish (With anti-slip option).
• Gloss finish (Without anti-slip option).
• High build formula.
• Great resistance to vehicles.
• Great for medium to high traffic areas.
• Heavy duty and long lasting.
• High durability and is easy to clean.

 If you're looking for a product for exterior use click here to view the relevant item.

PRODUCT DESCRIPTION
Everest Trade - Industrial Grade Concrete Floor Paint is a Premium single pack,  hard wearing, highly durable polyurethane resin based floor paint, ideal for use in industrial areas such as warehouses, factories and industrial units due to its high build, high durability formula. 

Available in an anti-slip variant which adds silica particles to provide a textured finish to improve grip and reduce the risk of slipping.

High durability against abrasion and impacts, provides better impact and abrasion resistance than the epoxy floor paints while also being much easier to apply.

It provides a tough petrol and oil resistant finish with excellent durability while also providing great tyre pluck properties good for areas with forklifts and work vehicles.

Ideal for use in large factories, industrial units, garages and on workshop floors.

Made in England with Premium PU Resins.

This item is always in stock for all order sizes, fast delivery on any amount, important if you have a large area to cover.

 
SURFACE PREPARATION
Ensure all surfaces are sound and clean, free from dust and flaking paint. 
Ensure surface is completely dry and free from condensation and damp.
Remove any loose or flaking paint.

If bare concrete is being painted it is advised a base coat of "Everest Trade polyurethane floor primer and sealer" is used to get the best results as the primer will provide a penetrating base coat for the top coat to anchor to and to eliminate the risk of delamination.

Power floated and self levelled floors need to be etched before application of any floor paint, this can be done with an acid etching solution or using a floor grinding machine.
 
COLOURS AVAILABLE
Red, Blue, Black, White, Dark Grey, Grey, Light Grey, JCB Yellow and Green.

As well as any British standard or RAL colour for orders of 100 litres and over.
Click here for a colour chart.
 
SPREADING RATE (Coverage)
Approximately 5 - 7 square metres per litre.
 
DRYING TIME
Under normal circumstances, it should be touch dry in 6 hours if well ventilated and conditions are dry.
 
APPLICATION
Apply by brush, roller, conventional H.V.L.P* or airless spray*.

*Anti-slip option this product is not sprayable.

Mix thoroughly before use with a paddle mixer drill attachment.

Two coats should be applied thinly and evenly to provide maximum hardness when dry and to minimise drying times.

Make sure the surface is 100% dry and free from any moisture or contaminants before application.
 
STORAGE PRECAUTIONS
Store away from heat and naked flames. Secure lid between uses to prevent paint hardening.
 
THINNERS
White Spirit or Turpentine Substitute can be used for thinning.
 
BATCH INFORMATION

We recommend ordering all the paint required in one order so you receive the same batch, Ordering on different dates will result in receiving different batches which may result in a shade difference.

This is fine if you are planning on using the different batches on different coats, However, it's not recommended to use on the same coat.

*only if the anti-slip option is selected.